Water Well Drilling Rigs

	Truck Mounted Drilling Rigs
	DTH DTH cum Rotary Combination
	Tractor Mounted Drilling Rigs
	Trailer Mounted Drilling Rigs
	DTH drilling rig DTHR Drills Tractor Mounted Drill Trailer Mounted Drills
	DTHR / ROTARY DRILL RIG Brief Technical Specification
	DESCRIPTION MODELS DTHR 300 DTHR450 DTHR 600 Drilling Capacity: Drill hole size Max. Remaining Size (in steps) Max. Depth Drill rod size 10.0” (254mm) 14.0” (335mm) 984 ft (300 mtrs) 4.5” (114 mm) 10.0” (254mm) 14.0” (335mm) 1475 (450 mtrs) 4.5” (114 mm) 10.0” (254mm) 16.0” (406mm) 1965 ft (600 mtrs) 4.5” (114 mm) (Under Favourable Drilling Condition) Mast: Construction Centraliser opening R.H Travel Sturdy Box Type 16.0” (406mm) 23 ft (7 mtrs) Sturdy Box Type 16.0” (406mm) 23 ft (7 mtrs) Sturdy Box Type 18.0” (457mm) 23 ft (7 mtrs) Rotary Head: Max. Speed Max. Torque 0 to 120 rpm 434 Kgf 0 to 120 rpm 475 Kgf 0 to 120 rpm 519 Kgf Feed System: Pull Up Force (Max.) Pull Down Force (Max.) Rapid speed (up) 11285 Kgf 5525 Kgf 40 m/min 16085 Kgf 8480 Kgf 30 m/min 21990 Kgf 11215 Kgf 24 m/min Hydraulic System: Max. Operating Pressure Filtration (Nom) Return Tank Capacity 220 bar 10 microns 750 ltrs 240 bar 10 microns 800 ltrs 210 bar 10 microns 800 ltrs Prime Mover: Input Drive Driven by suitable Diesel engine Driven by suitable Diesel engine Driven by suitable Diesel engine Levelling Jacks: Cylinder Stroke 4 No.s Ø 125mm X 610mm 4 No.s Ø 125mm X 610mm 4 No.s Ø 125mm X 610mm (System Consists of Reverse Flow Resricted Valves) Break Out Wrench: Actuation Type Cylinder Stroke Hydraulic 300 mm Hydraulic 300 mm Hydraulic 300 mm Mud Pump: Bore Stroke Max. Flow Max. Pressure Drive 152 mm 152 mm 1021 LPM 15 Kg/cm² Hydraulic 152 mm 152 mm 1021 LPM 15 Kg/cm² Hydraulic 152 mm 200 mm 1361 LPM 20.75 Kg/cm² Hydraulic Options: Oil Cooler Type Water Injection Pump Flow Max. Presssure Type of Drive Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 36 Lpm 30 Kg/Cm² Hycraulic Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 36 Lpm 30 Kg/Cm² Hycraulic Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 55 Lpm 42 Kg/Cm² Hycraulic
	Compressor/Rod changer/Hoist/Water pump with drive are offered as the per the requirement of the customer technical specifications Getech Industries Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly (In view of continuous R&D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice)
	DTH DRILL RIGS Technical Specifications
	Description Models DTH 1000 DTH 1500 DTH2000 Drilling Capacity: Drill hole size Max. Depth Drill Rod Size 6.0” – 8.0” (152mm – 203mm) 1000ft (305mtrs) 4.5” (114mm) 6.5” – 8.0” (168mm – 203mm) 1500ft (457mtrs) 4.5” (114mm) 6.0” – 10.0” (152mm – 254mm) 2000ft (610mtrs) 4.5” (114mm) (Under favourable drilling conditions) Mast: Construction Centraliser opening Rod/Casing handling Sturdy channel 270 mm 6.0 mtrs. Sturdy channel 270 mm 6.0 mtrs. Sturdy channel 305 mm 6.0 mtrs. Rotary Head: Max. Speed Max. Torque 0 to 100 rpm 245 kgf 0 to 100 rpm 245 kgf 0 to 100 rpm 490 kgf Feed System: Pull up Force Pull down Force Pull up speed 8590 kgf 5890 kgf 42 m/min 14070 kgf 7420 kgf 30 m/min 20940 kgf 10680 kgf 20 m/min Hydraulic System: Pump Reservoir capacity Operating Pressure Gear / Vane / Piston 600 ltrs. 210 bar (3000 psi) Gear / Vane / Piston 600 ltrs. 210 bar (3000 psi) Gear / Vane / Piston 600 ltrs. 210 bar (3000 psi) Levelling Jacks: Quantity Bore X Stroke Length 4 Nos. 100mm X 610mm 4 Nos. 125mm X 610mm-2 100mm X 610mm-2 4 Nos. 125mm X 610mm Air Line Lubricator: Type Max. Pressure Venture Type 450 psi Venture Type 450 psi Venture Type 450 psi Options: a) Rod Changer b) Oil cooler Type c) Welding Generator d) Water Injection pump Flow Max. Pressure Manual operated Rod changer Hydraulic Driven Fin type oil to air Hydraulic Driven 36 LPM 425 psi Manual operated Rod Changer & Jib Hoist Hydraulic Driven Fin type oil to air Hydraulic Driven 55 LPM 600 psi
	Getech DTHR 600 DTH Cum ROTARY DRILL RIG DTHR – 600
	Technical Specifications
	DTH Drilling To Hole Diameter: 203 mm (8”inches) and Maximum depth: 600 meters, Rotary Drilling to Hole Diameter: 311 mm (12¼”), Maximum Remaining Diameter: 407 mm (16”) and Maximum Depth: 600 meters. 6 X 4 Carrier Truck Minimum. Load capacity of 25 Tonnes Prime Mover engine capacity: 260HP @ 2200 RPM Mast Overall Length: 9000mm Feed System has Pull Back: 22500Kgf and Pull Down: 11000Kgf Rotary Head Assembly torque upto 600 Kg-m Stabilizer Cylinder bore Dia of 125mm Break out Winch has Cylinder bore Dia: 80mm and Stroke: 300mm. Mud Pump Max Flow of 1685 Liter/min Air Compressor to 1350 Cfm/350 PSI
	MINI CRAWLER MOUNTED HYDRAULIC RIGS
	GETECH Hydraulically operated multi purpose Mini crawler Mounted Rigs are specially designed for fast & cost effective drilling by air, mud or foam drilling methods using down-the-hole hammers & bits, core barred and tools, rotary tricone bits and other conventional tools as per customer’s choice, Hydraulic system powered by Deck engine is operated by fixed displacement pump with proportional valve, which regulates track motors, rotary head speed, feed etc., Centralized control panel located close to the drilling point ensures convenience of operation, Getech Rigs require minimum maintenance and easy to operate.
	Technical Data
	Description Core Drilling Application KMC - 10 DTH Drilling Application KMC - 10 Capacity: Drill hole Dia.(CORE/DTH) Drill Depth Over Burden Drill Dia. Over Burden Drill Depth NW / NQ 500 Feet. ----- ----- Under Favorabnle drilling conditions 4.5” 500 Feet. 6.5” 150 Feet. Under Favorabnle drilling conditions Hydraulic System: A)Prime Mover B) Feed Pull up Force. Pull Down Force. Pull Down Speed. Pull up Speed C) Rotation Speed Torque Speed. Torque. Deck Engine 942 HP @ 1500 rpm) 4700 Kgf. 2400 Kgf. 30 m/min. 24 m/min. 0-80 rpm (Low mode) 203 Kgf-m and 0-410 rpm (High mode) 41 Kgf-m Deck Engine 942 HP @ 1500 rpm) 4700 Kgf. 2400 Kgf. 30 m/min. 24 m/min. 0-80 rpm (Low mode) 203 Kgf-m ------------ ------------ Compressor Minimum Suggested ---------------------------- 540 CFM & 185 PSI Under Carriage Maximum Speed 2 kmph Grouser Type Single/Triple Wheel Base 1650 mm Grouser width 254/310 mm Ground pressure 0.78 kgf/sq.cm Type of Drive Independent Hydraulic Motor For each Track No. of Rollers. 5 on each track Maximum Speed 2 kmph Grouser Type Single/Triple Wheel Base 1650 mm Grouser width 254/310 mm Ground pressure 0.78 kgf/sq.cm Type of Drive Independent Hydraulic Motor For each Track No. of Rollers. 5 on each track Water Pump Capacity Suggested min Drive & Mounting 50 LPM @ 35 Kgf/cm² 36 LPM @ 28 Kgf/cm² Hydraulic Hoist: 1 Ton @ 30 meters / minute -----------------------
	GETECH Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly. (In view of continuous R&D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice)
	Getech – 1000 SP Drilling Rig
	Maximum Drill hole Diameter – 20” and Maximum depth – 10 ft. And 6” – 12” upto a depth of 1000ft Mast Length – 8800 mm Rotary head speed 0 – 65 R.Pm. Rotary head Torque 0 – 900 Kg-m Feed system pull up – 11,200 Kgs Feed system pull down – 5500 Kgs Engine – 260 HP @ 2200 R.Pm Fitted with mobile Crane Fitted with 1150/300 IR. Compressor

Piling Drilling Rigs

KPR5-42 DTH PILING DRILL RIG Technical Specifications Drill hole of Maximum Diameter: 1066mm (42”) and Maximum Depth: 5 Meters Mast Has Overall Length of 8000 mm Rotary Head of Maximum, Speed: 0-20 Rpm and Maximum Torque: 2400kg-m Feed System has Pull Up capacity: 15000 kgf and Pull Down capacity: 5800 Kgf Prime Mover has engine of 260 ps @ 2100 rpm Stabilizer has Cylinder bore Diameter: 125mm and Stroke: 610 mm Breakout Wrench has cylinder bore Diameter: 100 mm and Stroke: 300mm

General KPR5-42 Model, skid mounted Hydraulically Operated Top drive Drilling Rig, Designed to handle Air Drilling application. This Rig is capable of Drilling in different formations such as Medium to Hard Rock by DTH method upto a depth of 16 ft. Under favorable Drilling Conditions. The following are the detailed specifications Capacity DTH Drilling: Drill hole Diameter - 42 (1066) Inches (mm) Max. Drilling Depth - 16 (5) Feet. (Mt.) Drill rod Diameter - 8 (203) Inches (mm) Drill rod Length _ 6 (2.0) Feet (Mt.) Under favorable Drilling Conditions Mast Sturdy structural Mast of electrically welded construction, main members made out of heavy duty structural steel material reinforced with suitable cross members, So that it is strong enough to withstand the high drilling loads. Mast length - 5000 mm Raising & Lowering - With Hydraulic cylinder Rotary Head travel - 3200 mm Rotary Head Heavy duty Hydraulic Driven Top drive Rotation head having infinitely variable speed (0 to 20 RPM) will be provided. This Unit travels on the Mast and is of sturdy construction to absorb sudden shock loads generally encountered during Drilling Operations. Max. Speed (spindle rpm) - 0 – 20 Rpm Max. Torque - 2400 Kg – m Feed System Feed system is provided with adequate travel for handling drill pipes & Casing pipes upto 6 Mt. long. A suitable hydraulic cylinder actuates the feed and hoist. The feed system has the following capabilities: Feed cylinder size - Ø125 x Ø90 x 3500 mm Pull back/up Capacity - 10000 Kgf Pull down Capacity - 5000 Kgf Pull back/up Speed - 30 Mt/min, Feed Cylinder Qty. - 1 No. The feed system will be incorporated with Hold back arrangement to control and limit weight on bit, rapid and slow feed arrangement to sui9t the variable ground conditions.

• TC Rock Roller Bits: 7 7/8 to 14 1/2
• Milled Tooth Rock Roller Bits: 7 7/8 to 14 1/2

Cluster Hammers

GETECH Cluster Hammer (HIPPO) is manufactured to international specifications, from only the best quality Alloy Steel, machined to high precision and supreme standards. The product is heat - treated in the most modern, fully process controlled, in house facility. The Tungsten carbide buttons which are used are obtained from leading and reputed indigenous and foreign manufactures.

GETECH Cluster Hammer is a quality product, that conform to international standards and strict quality control methods.

GETECH products are constantly improved with adaptation of the most recent manufacturing technologies and the product features always ensure,

HIPPO Hammer Specifications – For Imperial Conversion

In view of continuous R&D and Product Improvement Programme all specifications, features etc., are subject to amendments without prior notice.

Udex System

	4.5" X 6.5"
	6.0" X 8.0"
	6.5" X 8.5"
	8.0" X 10.0"

Hole Openers

Available Sizes

A Hole opener is a spacialised tool used to enlarge an existing size hole. GETECH uses only the highest grade of steel in producing our superior line of Hole openers. Form 6 to 20 with whatever Pilot Hole need, with GETECH Hole opener you will always know that it was produced with the quality you have come to expect from all GETECH products, built with the shanks to fit all popular brand of hammers.

GETECH Hole openers will give you hour after hour of trouble free drilling.

	8.0" X 12 1/4"
	8.0" X 14.0"
	8.0" X 16.0"
	10.0" X 16.0"
	10.0 X 20.0"

Friction Welded Drill Rods

• Increase in the life of Drill Rods by 90% than the normal Drill Rods
• One side rubbing, hole deviation and leakage at joints will not occur
• No weld layer will be visible and therefore less tolerance in the rod guide.
• Traction force and Strength will be increased by 40%
• Available sizes - 3"/31/2"/41/2"/51/2"/8"

UPVC Pipes

We are trading from the leading mfgs in India & Abroad, casing pipes using latest technology for Bore/ Bore-wells.

• CM type: 40 mm to 250 mm with normal measurements
• CS type: 150 mm to 250 mm with normal measurements
• CM (middle type well): Suitable pipes for wells of depth 150 mtr to 250 mtr
• CS (small type well): Suitable pipes for 80 mtr depth wells

• Better quality, similar wall thickness and well-built
• Compressive energy with adequate pressure
• Light weight for easy transportation & to set
• Water drawing easier as bore works uninterrupted

• Precise Gravity: 1.40 g/cm3 - 1.45 cm3
• Wicket Softening Temperature: 76 degree centigrade
• Tensile Energy: 50 + or - N/mm2
• Effective Energy: IS - 12818 applicable
• Productive Energy: 55 N/cm2

• Put down carefully casings and ribbed screens into bore-wells
• Select gravel packing after checking soil status as plot quantity for screens depends on it
• Ensure no empty space while gravel packing the pipe
• Avoid high pressure and pressure in opposite direction while drawing water

• Male thread and female thread are fixed either side of our casing, ribbed and screen pipes
• Joints have better tensile power than others to carry more assembly weights to deeper levels
• Load decreases on threaded joints when total assembly weight rests under water

• Made with High quality material to make it more durable and strong
• Are available in attractive designs & colors
• Our master batches also have the U.V. Stabilizer component in it
• Keep water hygienically clean, avoid fungus & bacteria
• Are easy to carry, install and they occupy very less space
• Are leak proof, rust proof and maintenance free
• No need of painting or water proofing
• Are cost effective, economical compared to the products of other and conventional tanks constructed with bricks and RCC
• Are available in the form of cylindrical, vertical and loft tanks
• Are available in sizes ranging from 200 to 5000 ltrs. (Cylindrical, vertical) from 150 to 1000 ltrs. (Loft tanks)

Rectangular loft tanks
Dimension in mm

Cylindrical Vertical Tanks
Dimension in mm

Solvent Cement

• Inspect the pipe and fittings to ensure that they match perfectly
• Cut the pipe square, using the hacksaw, clear burrs with knife and cotton waste
• Rub with the Sandpaper outside of pipe and inside of fittings. Clean again with cotton waste
• Apply solvent cement evenly with a soft brush on the outside of the pipe, to a width slightly more than the corresponding depth, as also on the inside of the fitting
• Insert the pipe in fitting and turn it through 90ºC, to ensure uniform distribution of cement
• Hold the joint for 2 minutes and ensure that the pipe does not slip out of fitting
• Wipe out the excess cement from entire surface of the joint
• The joint should be allowed to set, undisturbed. It should be pressure tested only after 24 hours.

Applications

• It well be useful for jointing of PVC pipes and fittings
• It can be used for jointing any of two of the products made from PVC material

Available sizes

25 lm, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml, 5000 ml

Sizes of Solvenet Box Packing Will be as under

Safety Precautions

• Avoid contact with skin
• Always replace lids tightly after use
• Store in a cool place away from direct sunlight
• Do not breathe Solvent Cement vapours
• Shake the solvent cement container thoroughly before use
• Do not smoke while working with solvent cement, as it is highly inflammable
• The excess solvent should b e wiped out from entire surface of the joint

Solvent Cement

CM Casing Pipes - Table - In All Dimensions & MM

General Dimensions

HDPE Pipes

Salient Features of HDPE Pipes

• Manufactured as per IS 4984:1995 standards
• Pipes manufactured either in long coils or 6 meter length depending on pipe dimensions and customer requirement

Physical and Chemical Properties of HDPE Pipes

• More Flexible
• Light in Weight
• Corrosion Resistant
• Chemically inert
• Economical
• Smooth inner and outer finishing resulting in low flow resistance and low power consumption
• Availability of pipes in long coils reduces much of the cost of laying, jointing and additional couplers
• Leak proof, strong and easy jointing (Butt jointing)
• Temperature resistant from 40°C to 80°C
• Very good insulation properties
• Excellent UV resistance

Applications of HDPE Pipes

• For Agriculture & Drinking water lines
• As delivery pipes for single phase & 3 phase submersible pumps
• As suction and delivery pipes for jet pumps
• As suction and delivery for centrifugal & monoblock pumps
• As delivery pipe for open well submersible pumps
• Telecom & electrical ducting
• Slurry disposal
• Industrial flow applications
• Sewage pipe systems

What GETECH Offers you

• Best quality pipes at most reasonable prices
• Pipes that meet your needs (Special customer requirements are accepted)
• Standard pipe coil lengths of various sizes as under:

• Our job goes beyond just selling pipes, as we are committed to the complete customer service
• We take up pipeline projects on TURNKEY basis
• We offer HDPE pipe solutions in place of conventional pipes (PVC, GI, Concrete etc.) at competitive price and guaranteed service
• We provide water lines for agricultural needs with free butt jointing and testing
• We extend service free of cost any future leakages / defects in the pipe line caused by faculty manufacturing or faulty jointing for a period of 20 years
• We offer poclain facility (for earth work) to the farmers who buy min. 100 lengths (6 mtrs length), at concessional rates

Dimensional details for HDPE Pipes Made as per IS :4984 - 1995

Wall thickness of pipes for material grade PE 63

Dimensional details for HDE pipes made as per IS: 4984 - 1995

Wall thickness of Pipes for material grade PE 80

Ring fit Pipes

A Dynamic New Product

• Integrated Thermoplastic Ltd., a unit of UPVC Group of Companies has developed Ring fit pipes to overcome problems commonly experienced in solvent cement jointing of higher diameter (above e 160 mm) uPVC Pipes
• These UPVC Gold branded Ring fit pipes offers excellent advantages over other uPVC pipes specially for underground applications

The Ringfit pipe convenience and advantages

• Pipelines utilizing Ring fit pipes can be taken up for pressure testing immediately on completion of the section. Unlike for solvent cement joints, the waiting period required for solvent cement jointing is entirely eliminated, resulting in short installation duration
• Ring fit pipes are easy to install in the field, Ring fit pipes of diameters below 140 mm can be jointed by hand pressure. For large sizes a pipe jack is available for the purpose

The Ring fit flexibility

• Pipe lines made with Ring fit pipes automatically accommodate liner expansion and contraction thus eliminating the need for expansion loops as are required for solvent cemented pipelines
• Slight shifting of soil or bending of the pipeline upto 2 degrees per joint can be easily accomodated by Ring fit pipes

The unique Elastomeric Sealing Ring

• Ring fit pipes are fitted with a special elastomeric sealing ring with has many advantages over natural rubber
• It is not affected by ozone, ultraviolet radiation (sunlight), bacteria, fungus and termites
• It is resistant to salt water, organic vegetable oils, dilute acids, dilute alkalies, aqueous chlorine and other pollutants and contaminants found in communal sewage and waste water
• It has prolonged self-life and Manufacturers claim a shelf life over 50 years
• Highly reliable and robust. Tests have shown that Ring fit joints successfully withstand pressures beyond the specified testing pressures for the pipe.

Precautions to be taken

• While jointing higher diameter pipes with solvent cement, the cement applied sometimes tends to dry before the joint can be completed, resulting in imperfect joints leading to leakage when used. This situation could be avoided by applying correct quantity of solvent cement and quick jointing of pipes and too little solvent cement will lead to weak or leaky joints, and too much will result in accumulation of cement inside the pipe which eventually weaken the area adjoining the joints
• Solvent cement is inflammable and calls for extra care in handling. Its life deteriorates if it is exposed to the sun and after longer periods of its storage
  

CS Casing Pipes - Table - In All Dimensions & MM

General Dimensions

Suction & Garden Pipes

uPVC Plasticizers and Pipe Industries, Nandyal, has been promoted by the well known Getech Group of Companies. The company has gained high reputation in the field of the manufacture of PVC HOSES & DRIP IRRIGATION system in a remarkably short span of time, the credit of which goes to the chairman of the Group Sri S.P.Y.Reddy, a great visionary technocrat and pioneer in the PVC industry.

uPVC Plasticizers and Pipe Industries has an infrastructure and operating systems which mach the highest standards practiced in the industry. The manufacturing activities are well taken care of by a team of highly competent professionals. The rich knowledge base and the vast experience of our team members backed by our time tested technology give us the right platform we require to provide the sort of smooth and flawless service we claim to provide. Our standardized operating systems provide quality services adequate to the products manufactured by the company.

PVC Heavy Duty Suction House - Applications

• Construction and other industries.
• Suction of water, agriculture and others.
• Suction of saline water, light acids, sewage, alkaline and other chemicals excepting industry.
• Suction of dug chart.
• Civil engineering and sub way mining constructions.
• Fish and shipping industry.
• Conveying of granules of fine particulars of raw material in processing industries.

Features & Specifications

• Minimum friction & maximum flow is maintained.
• Good environmental stress crack, corrosion, frost, abrasion crush, kink not and chemical resistance.
• Excellent pressure & vaccum ratings.
• Easy and quick installation and safe portable water supply.
• Product range from 25 mm to 110 mm.

Product Description

PVC Petrol & Garden Tubes

The unit also manufactures PVC petrol and garden tubes in the range of 20, 25, 32, 40 and 50 mm. Salient Features of the same are as under:

Applications

• Electronic products and vehicle parts.
• Transfer pipe for petrol, diesel and kerosene.
• Medical equipment piping system.
• Ice-rink constructions.
• For gardening.
• For domestic
• Any other portable use.

Characteristics

• Made of super powder of PVC and inner and outer side are made smoother with the soft PVC compound.
• It is flexible and durable enough against tube and cover pressure.
• Available in various colours.

Product Description

Drip Irrigation

Dripper: ISI CM/L: 6390170, Pipe: CM/L: 6376883

FOR MORE QUALITY & MORE YIELDS USE GE-TECH DRIP IRRIGATION SYSTEM

UPVC Plasticizers and Pipes Industries, Nandyal, an important unit of the prestigious Getech Group of companies manufactures, quality oriented – long lasting Drip Irrigation Systems to suit your needs and they are now before you.

Use:

• When your land is not leveled.
• When the land does not have sufficient water source and supply.
• To avoid wastage of water in irrigation.
• When you are not able to five uniform irrigation to the field.
• When you want to supply required nutrients with uniform distribution and reduce / save 25% expenditure in Fertilizer application.
• Drip for saline and alkaline soils and get excellent yields.
• Drip in lands of excess weed growth, Reduce weed growth and save labor cost.
• For all Orchards, Flower Plants, Sugarcane, Maize, Vegetables and Wheat and for all types of plants and trees.
• Drip and increase pest and disease resistance in the plants.
• Drip, to bring your excess land under irrigation.
• Drip, for augmenting productivity upto 30% of normal production.

OUR Production with online

Our Production with inline

Drill Rods (API Certified)

Oil Well Applications

Suppliers for

• Drill Pipes / Heavy Weight Drill Pipes / Drill Collars
• Production Tubing (API & Premium Connections)
• Casing Pipes (API & Premium Connections)
• Coupling, Pup-Joints & Cross Overs
• Oil Field Accessories & Services
• Repair / Reconditioning of Drill Pipes / Premium Connections
• Field Inspection Services

India Mark II

India Mark – II handpump is divided into four main assemblies

Pump Head Assembly (above ground mechanism) consists of Head with Inspection cover, Third plate, Handle, Water chamber and stand.

Cast Iron Body painted outside and lined from inside with seamless Brass liner at 63.5mm I.D., Gun-metal valve components and Nitrile rubber components. Discharge capacity is 15 liters @ 40 strokes per min.

12mm dia mild steel electro galvanized, in three meter lengths with hexagonal coupling of both the ends.

32mm N.B., G.I. Medium pipe in three meters length with a socket at one end.

Simple Installation of India Mark-II Handpump, when installed properly, gives very long uninterrupted service. For step installation procedure and other details, please refer to our installation and Maintenance Manual.

• Suitable for borewell installation with static water levels upto 45 mtrs.
• The entire above ground components are fabricated out of steel sections hence they are strong and study.
• The pump Body is hot-dipped galvanized hence corrosion proof.
• Handle is designed for ease of operation.
• Pre-greased sealed Ball Bearings add to the ease of operation and elimination of greasing during use.
• The Spout design ensures collection of water in any type pf vessel normally used.
• Pedestal Design ensures the bore hole is sealed to prevent water source contamination.
• Cylinder with highly polished brass liner ensures long life of Nitrile Rubber Pump Bucket.
• The Rubber parts in the cylinder are nontoxic and hence they course no health hazards.
• All internal parts of the cylinder are made of Gunmetal to ensure long life.
• These pumps can be easily adopted for Shallow Well, Windmill and Motonised operations with minor modifications.
• India Mark – II pump works on the positive displacement principle, hence the discharge remains constant irrespective of the depth of bore.

India Mark III

VLOM Hand pump is the outcome of extensive R & D based on the Village Level Operation and Maintenance concept, Promoted by UNICEF, UNDP, WORLD BANK Pumps can be easily maintained by Villagers with minimum Handling / Maintenance skills.

• India Mark II cylinder assembly modified to have open - top cap to suit 65 / 50mm N.B., G.IO riser pipe.
• Upper valve and Lower valve assemblies extractable without removing riser pipe and cylinder body.
• Suitable for setting depth upto 33 Mtrs.

Note: All fast moving Spare parts and Installation & maintenance Kit for all the models of hand pumps are available.

Afridev

• Non corrosive below ground components capable of working in corrosive water sources.
• UPVC Riser Pipe, Cylinder, Plunger & Foot Valves are light weight and inexpensive.
• 10mm dia, Three meter long Connecting Rod with forged eye & hook at either sides for interlocking easily, without the use of any tools.
• Fulcrum & Rod hanger pins are supported on special grade plastic Bush Bearings easily replaceable.
• Rubber centralisers are provided to each connecting rod to prevent internal damage to UPVC pipes, due to obrasion.

India Mark – II Extra Deepwell handpump are manufactured as per Bureau of Indian standards Specs: viz. 13287/92 capable of lifting water upto 90 meters setting depth.

Air Compressor

Model Free Air Delivery Nominal Working Pressure Engine Overall Dimension, mm M / min Cfm Psi g Length Width Height Trolley Mounted DL 03 007 49.6 175 100 HA 494, KOEL 3485 1580 1590 DL 04 012 8.50 300 100 ALU 6.65, AL 3410 1720 1880 DL 04 012 8.50 300 100 4 BT. Cummins 3160 1720 1932 DL 04 012 8.50 300 100 W04D Hino AL 3060 1720 1690 DH 04 012 8.50 300 150 4 BT, Cummins 3160 1720 1932 DL 04 014 9.91 350 100 4 BT, Cummins 3160 1720 1932 DL 05 016 11.33 400 100 W04CT, AL 3060 1720 1690 D11 05 016C 11.33 400 150 6 BTA, Cummins 4375 1620 2400 DH 05 018 12.74 450 150 6 BTA, Cummins 4375 1620 2400 DL 05 024 17.00 600 100 6 BTA, Cummins 4375 1620 2400 DV 06 026 18.40 650 200 6 CTA, Cummins 5680 1780 2600 DM 06 030C 21.24 750 125 6 CTA, Cummins 5680 1780 2600 Skid Mounted DH 05 019 13.45 475 150 6 BTA, Cummins 2750 1100 1837 DV 06 026 18.40 650 200 6 CTA, Cummins 3000 1675 2100 DV 06 036 25.49 900 200 NTA 855 BC, Cummins 4865 2200 3110 DX 23 030 21.24 750 250 NTA 855 BC, Cummins 6090 2300 3050 DZ 23 036 25.49 900 350 KTA 1150 C, Cummins 4200 2100 2690 DU 23 040 28.32 1000 275 NTA 855 BC, Cummins 4562 1844 2370 DY 23 044 31.15 1100 300 NTA 855 BC, Cummins 4562 1844 2370 DZ 23 044 31.15 1100 350 KTA 1150 C, Cummins 5750 2100 2338 DZ 23 048 33.98 1200 325 NTA 855 BC, Cummins 4562 1844 2370

Mobile Water Treatment Unit

Truck Mounted Mobile Water Purification System: 1000 ltr/hr to 10000 ltr/hr capacity for disaster management operations like Flood, Earth Quakes & Tsunami etc. for providing Drinking Water.

Ultra Purification System with Ozon Purifier: This unit can be mounted on boats for providing drinking water at "Deep Sea Fishing".

Water Purification System	Water Purification System

Water Purifier

GETECH Nano Pure Unit is a high quality automatic pure water production unit.  It requires no power for its operation and maintenance cost is literally zero.  The Filters can be used up to 25000 liters  of water purification.  By using 100%  healthy drinking water you and your family will be protected from waterborne diseases.  Prevention is better than cure.

GETECH Trading specializes in delivering healthy solutions to everyday living. We are currently engaging the latest technology from the United Kingdom & the United States of America in our production of Water Filtration Systems that serves the ultimate purpose of healthy drinking water in the most convenient form for our busy lifestyles. Our products are currently sold in the local market via distributors, retail outlets and assigned agents. Apart from the local market, we have also been exporting to other developing countries such as Sri Lanka, Bangladesh, Indonesia and Vietnam.