drilling today drilling rigs
The Mining, Drilling & Earth Moving Equipment drilling rigs drilling rigs
drilling today downthehole drilling rigs drilling rigs
 
» Home

LMP Precision Engineering Company

RotaHam Series

RotaHam Series
A Versatile drill with a combination of both Direct Rotary and DTH Technologies.
   
COMBINATION RIGS.
Rotary-cum-percussion is the combination method of percussion and rotary drill. It is not practicable to put one drill for one operation and get another drill for second operation. Combination drill is used so that any drilling operations can be done depending upon the condition of the site. These drills are used generally for alluvial formation comprising boulder rocks.
 
RATED CAPACITY :
  165 mm dia. Holes upto 300 mtrs. by DTH method in hard rock and 203/215 mm dia. Holes upto 300 mtrs by mud rotary method in alluvial soil. 406/445 mm dia. Hole upto 60 mtrs. by mud Rotary method through reaming operation.
   
PULL DOWN :
  Through hydraulic cylinder and wire rope. Pull down force variable upto 16,300 Kgs. Micro-Feed’ and Hold-back arrangement.
   
PULL UP (HOISTING) :
  Variable up to 13,400 Kgs. High speed hoisting provided.
   
ROTATION HEAD
  Top drive hydraulic motor driven through gear train immersed in oil bath providing infinitely variable speeds of 0-100 RPM.
   
AIR COMPRESSOR
  21 mt. 3/min at 17 kg./cm2 (750 CFM ,250 PSIG), Rotary screw type, driven by its own separate diesel engine
   
MUD PUMP
  ‘PRECISION’ make model S-150 duplex double acting reciprocating mud pump having `6” stroke and fitted with 5.1/2” liner capable of delivering 900 LPM and a maximum pressure of 18 Kg/cm2
   
MOUNTING
  6 x 4 drive Ashok Leyland `HIPPO’ Truck Chassis.
   
POWER UNIT
  Rig including mud pump driven by truck engine through power take off. Compressor driven by independent diesel engine.
   
MAST
  Heavy duty structural steel construction electrically welded capable of handling 6.1 mtrs. (20’) long drill rods. Mast raised and lowered by hydraulic cylinder.
   
HYDRAULIC SYSTEM
  Comprising of hydraulic pumps, control valves, reservoir, etc. Total oil displacement around 350 LPM at a pressure of 180 – 210 Kg/cm2
   
LEVELING JACKS
  4 Nos. Hydraulic leveling jacks with safety check valves provided.
   
AIR LINE LUBRICATOR
  13.5 Ltrs. Capacity provided.
   
WATER/FOAM INJECTION SYSTEM
  Reciprocating water injection pump provided.
   
AUXILIARY WINCH/ & JIB BOOM
  3000 Kgs. Capacity hydraulic motor driven Auxiliary winch provided. A hydraulically adjustable jib boom swiveling over 450 mounted on the top of the mast.
   
ROD CHANGER
  Hydraulically operated automatic indexing carousel for carrying 7 Nos. rods of 4.1/2” OD x 20’ length provided.
   
ROD RACK
  Rod Rack arrangement provided along the side of the mast to carry 8 Nos. drill rods.
   
SHOCK ABSORBER SYSTEM
  Shock absorber sub provided along with the rotation head to prevent damage due to shock loads.
   
DRILL ROD (RECOMMENDED )
  114 mm OD x 6.1 mtrs. (4.1/2” OD x 20’) external flush type drill rods with tool joints as per API standards.
   
OPTIONAL
  Mounting on two truck concept. Choice of Compressors Casing hammer attachment or ODEX system for simultaneous casing lowering.
 
 

Direct Rotary Drills [DR 500]

Direct Rotary Drills [DR 500]
ROTARY DRILLS They are meant for drilling in alluvial and semi-consolidated formations and for virgin areas in connection with exploration program, by using drilling mud fluid.
   

MODEL

DR – 500

HYDRAULIC SYSTEM

 

Rated capacity

 :

Drill Rod  Hole Dia   Depth

Pump type

:

Fixed displacement vane type.

 

 

60 mm   152 mm 198.2 mtrs

Discharge

:

60 LPM at 70 Kg./cm2

 

 

73 mm 203 mm 152.5 mtrs

Drive

:

Direct coupled

 

 

89 mm 305 mm 91.5 mtrs

 

 

 

MAST

:

 

ENGINE

:

Truck / Trailer / Skid

Construction

:

Electrically welded tubular steel construction

Model

:

Truck Engine  Diesel  Diesel

Height- Standard

:

5.48 mtrs. (above rotary table)

BHP

 

----                   40         40

-  Optional

:

8.23 mtrs (above rotary table)

Speed  (RPM)

 

----                   2000      2000

Gross Load capacity

:

9091 kgs

 

 

 

Crown Block

:

2 sheaves for wire lines;

TRANSMISSION

:

4 or 5 forward and 1 reverse

 

 

Angled over the drums;

KELLY

:

73 mm x 4.27 Mtrs.

 

 

2 spring mounted pull-down

 

 

Long Round 3 flutted.

 

 

Tension sheaves.

LEVELLING JACKS

:

4 Nos. mechanical

Raising & Lowering

:

Two double acting Hydraulic cylinders

MOUNTING

:

Truck or Trailer

 

 

 

OVERALL DIMENSION

:

Approx. Mast lowered position

ROTARY TABLE

:

 

 

 

Length     :  60 Mtrs.

Opening

:

120 mm

 

 

Breadth   :  30 Mtrs.

Construction

:

Spiral Bevel Gears; Oil bath lubrication. Roller bearings.

 

 

Height     :   3.20 Mtrs.

Drive

:

Torque tube

 

 

 

 

 

 

 

 

 

Clutch

:

Disc type

 

 

 

Retraction

:

356 mm Hydraulic actuated

 

 

 

PULL DOWN

:

 

 

 

 

Type

:

Chain, Hydraulic actuated.

 

 

 

Feed

:

3.96 Mtrs.

 

 

 

Max. Pull down load

:

2273 Kgs

OPTIONAL :

 

 

 

 

 

* PRECISION make , S-150 Duplex double acting mud pump having 139.7 mm bore and  152.4 mm stroke at a maximum of 100 strokes/min with a discharge of 915 LPM at 17.99 Kg/cm2 pressure

DRAW WORKS

:

Two identical Drums.

* DTH attachment for drilling in hard Rock by DTH   method.

Barrel dia x Length

:

133 mm x 127 mm

* Hydraulic leveling jacks with safety check valves.

Flange dia

:

305 mm

* Hydraulic Break out Wrench.

Pull Capacity

:

2273 Kgs. (single line bare drum)

 

 

 

 

 

 

 

 

 

 

 

 

 

Clutch

:

Multi disc type

Brake

:

High leverage mechanical

Drive

:

Torque tube

MUD PUMP

:

STANDARD

Make

:

Precision

Model

:

S-125

Type

:

Duplex double acting

Bore x Stroke

:

114.3 mm x 127 mm

Max. Stroke/Min

:

110

Pressure & Discharge

:

550 LPM at 13.85 kg./cm2

Drive

:

`V’ Belt

Clutch

:

Friction disc type
 
 

Direct Rotary Drils [DR 1000]

Direct Rotary Drils [DR 1000]
   
 

MODEL

 :

DR – 1000

MUD PUMP

:

STANDARD

 

Rated capacity

 :

Drill Rod   Hole Dia   Depth

Make

:

PRECISION

 

 

 

60 mm   152 mm    457.32 mtrs

Modal

:

S-150 Duplex Double acting.

 

 

 

73 mm   203 mm    304.87 mtrs

Bore x Stroke

:

139.7mm x 152.4 mm

 

 

 

89 mm   305 mm    182.92 mtrs

Maximum stroke/Min

:

100

 

MAST

 

Pressure & Discharge

:

915 LPM at 17.99 kg/cm2

 

Construction

:

Electrically welded tubular steel construction

Drive

Clutch

:

:

`V’ Belt

Positive Mechanical

 

Height- Standard

:

10.67 mtrs. (above rotary table)

 

 

 

 

          -  Optional

:

8.23 mtrs (above rotary table)

HYDRAULIC  SYSTEM

 

 

 

Gross Load capacity

:

13637 kgs

Pump type

:

Fixed displacement vane type.

 

Crown Block

:

Two sheaves for wire lines;

Discharge

:

60 LPM at 70 kg / cm2

 

 

 

Angled over the drums;

Drive

:

`V’ Belt

 

 

 

Two spring mounted pull-down

 

 

 

 

 

 

Tension sheaves.

ENGINE

:

Truck  trailer

 

Raising & Lowering

:

Two double acting Hydraulic cylinders

Model

:

Truck Engine  ALU-370 or equivalent

 

 

 

 

BHP

:

 ---                   106

 

ROTARY TABLE

:

 

Speed (RPM)

:

 ---                   2400

 

Opening

:

120 mm

TRANSMISSION

:

4 or 5 forward and 1 reverse

 

Construction

:

Spiral Bevel Gears; Oil bath lubrication.

KELLY

:

86 mm x 7 mtrs. long Round 3 flutted.

 

Drive

:

Roller bearings

LEVELING JACKS

:

4 Nos. Mechanical

 

 

 

Torque tube

MOUNTING

:

Truck / Trailer / Skid

 

 

 

 

OVERALL DIMENSION

:

Approx. Mast lowered position.

 

Clutch

:

Disc type

 

 

 

 

Retraction

:

356 mm Hydraulic actuated

 

 

Length    :  9.75 Mtrs.

 

 

 

 

Breadth  :  2.44 Mtrs.

 

 

 

 

 

 

Height    :   3.20 Mtrs  

 

PULL DOWN

:

(Optional)

 

Type

:

Chain, Hydraulic actuated.

 

Feed

:

7 Mtrs.

 

Max. Pull down load

:

3637 Kgs

OPTIONAL :

 

 

 

 

 

 

* PRECISION make , Duplex double acting S-200 Mud Pump having 152.4 mm stroke & 203.2 mm Bore with a maximum of 100 strokes/Min and discharge of 1435 LPM at 19.97 Kg/cm pressure.

  • * DTH attachment for drilling in hard Rock by DTH method.

  • * Hydraulic leveling jacks with safety check valves.

  • * Hydraulic Break out Wrench.

 

DRAW WORKS

:

Two identical Drums. 5.7” x 6.5”

 

Barrel dia x Length

:

146 mm x 165 mm

 

Flange dia

:

368 mm

 

Pull Capacity

:

4546 Kgs. (single line bare drum)

 

Clutch

:

Multi disc type

 

Brake

:

High leverage mechanical

 

Drive

:

Torque tube

 

Direct Rotary Drils [DR 1500]

Direct Rotary Drils [DR 1500]

ROTARY DRILLS They are meant for drilling in alluvial and semi-consolidated formations and for virgin areas in connection with exploration program, by using drilling mud fluid.

 

   
RATED CAPACITY
   
  8” [203mm] holes upto 1500 Ft [457Mts] directly using 2.7/8” [73mm] OD Drill Pipes.
  8” [203mm] – 10” [254mm] holes upto 1500 Ft [457mts] directly using 3.1/2” [88.9mm] OD Drill pipes.
  Larger size holes for various depths by reaming.
   
CASING LOAD
   
  26400 lbs [12000 Kgs.] by using Single sheave Traveling Block
  4400 lbs  [20000 Kgs.] by using Double sheave Traveling Block.
   
MAST
   
  Heavy Duty Tubular Steel Construction Electric welded
  42 Ft [12.8 mts] high above Ground Level during drilling
  70000 lbs [31818 Kgs] Gross Load capacity
  5 Sheaves + 1 catline sheave
  Raised and lowered by two hydraulic cylinders with safety check valves.
   
DRILL HEAD
   
  Rotary Type as integral unit with Draw works and Hydraulic pull down.  
  Opening – 3” [76.2 mm] / 3.1/2” [88.9 mm] /4.1/2” [114.3 mm)
  Hydraulic Retraction – 21” [533.4mm]
  Disc, Type Friction Clutch.  
   
CAT HEAD
   
  Shaft mounted provided on the right side of the drill head.
   
PULL DOWN
   
  16,000 lbs [7272 Kgs] pull down through twin hydraulic cylinders having 30” [762mm] stroke.
   
DRAW WORKS
   
  Hoisting and sand reel drum having bare drum single line pull of 15000 lbs [6818 Kgs] each.
  Barrel dia x length each drum – 7” [178mm] x 10.3/8” [263.5mm]
  High leverage Mechanical type Brakes, Single/Double on drums
  Chain Driven with multiple Disc Friction clutch.
   
MUD PUMP
   
  `PRECISION’ Model ‘S-200’ 8” [203mm] x 6” [152mm] or `S –150’ 6” (152mm) x 5 1/2 (139.7mm) positive displacement Duplex Double action Mud pump with interchangeable liners as per operational requirements having wider choice of discharge/pressure. ‘V’ Belts/Chain Drive
   
HYDRAULIC SYSTEM
   
 

21 US GPM [80 LPM] 1000 PSI [70Kg/cm2] – Fixed displacement vane type pump.

   
MOUNTING & PRIME MOVER
   
 

Truck / Trailer

  Powered by Truck Engine and/or suitable independent Engine(s)
   
TRANSMISSION
   
  5 Forward and 1 Reverses
   
KELLY
   
 

3.3/8” [85.7mm] OD x 28 ft [8.53 mts] long 3 fluted round Kelly.

   
LIGHTING
   
 

Truck Battery/Dynamo /Alternator

   
LEVELING JACKS
   
 

4 Nos. Mechanical or Hydraulic

   
CONTROL
   
 

Conveniently located for ease of operation.

   
OPTIONAL
   
 

Longer Mast

  Choice of Mud Pumps
  Choice of Hydraulic pumps
  41/8” (104.77mm) OD Kelly
  Hydraulic Breakout System
  Air clutches
  Diesel generating set for lighting
  DTH attachments for drilling by DTH method
  Casing drum
  Hydraulic leveling jacks
  Chain pull down having stroke length of 20 feet.
   
 

Direct Rotary Drills [DR 2000]

Direct Rotary Drills [DR 2000]

ROTARY DRILLS They are meant for drilling in alluvial and semi-consolidated formations and for virgin areas in connection with exploration program, by using drilling mud fluid.

 

   
RATED CAPACITY
   
 

8" [203mm] holes upto 2000 Ft [610 Mts] directly using 2.7/8" [73mm] OD Drill Pipes.

  8" [203mm] - 10" [254mm] holes upto 2000 Ft [610 mts] directly using 3.1/2" [88.9mm] OD Drill pipes.
   
CASING LOAD
   
 

27500 lbs [12500 Kgs.] by using Single sheave Travelling Block

 

55000 lbs [25000 Kgs.] by using Double sheave Travelling Block.

   
MAST
   
 

Heavy Duty Tubular Steel Construction Electric welded

 

46 Ft [14.0 mts] high above Ground Level during drilling

  90000 lbs [41000 Kgs] Gross Load capacity
  5 Sheaves + 1 catline sheave
  Raised and lowered by two hydraulic cylinders with safety check valves.
   
DRILL HEAD
   
 

Rotary Type as integral unit with Draw works and Hydraulic pull down.

 

4.1/2" [114.3mm] Hydraulic Retraction - 21" [533.4mm] Disc, Type Friction Clutch.

   
CAT HEAD
   
 

Shaft mounted provided on the right side of the drill head

 

Heavy Duty Tubular Steel Construction Electric welded

 

46 Ft [14.0 mts] high above Ground Level during drilling

  90000 lbs [41000 Kgs] Gross Load capacity
  5 Sheaves + 1 catline sheave
  Raised and lowered by two hydraulic cylinders with safety check valves.
   
PULL DOWN
   
  16000 lbs [7272 Kgs] pull down through twin hydraulic cylinders having 30" [762mm] stroke.
   
DRAW WORKS
   
  Hoisting and sand reel drum having baredrum single line pull of 16000 lbs [7272 Kgs] each
  Barrel dia x length each drum - 7" [178mm] x 10.3/8" [263.5mm]
  High leverage Mechanical type Brakes, Single/Double on drums
  Chain Driven with multiple Disc Friction clutch.
   
MUD PUMP
   
 

`PRECISION' Model 'S-200' 8" [203mm] x 6" [152mm] positive displacement Duplex Double action Mud pump with interchangeable liners as per operational requirements having wider choice of discharge/pressure. 'V'Belts/Chain Drive.

   
HYDRAULIC SYSTEM
   
 

21 US GPM [80 LPM] 1500 PSI [105Kg/cm2] - Fixed displacement vane type pump

   
MOUNTING & PRIME MOVER
   
 

Truck / Trailer. Powered by Truck Engine and/or suitable independent Engine(s).

   
TRANSMISSION
   
 

5 Forward and 1 Reverse.

   
KELLY
   
 

4.1/8" [104.7mm] OD x 28 ft [8.53 mts] long 3 flutted round kelly.

   
LIGHTING
   
 

Truck Battery/Alternator.(24 Volts DC)

   
LEVELING JACKS
   
 

4 Nos. Mechanical / Hydraulic

   
CONTROL
   
 

Conveniently located for ease of operation.

   
OPTIONAL
   
 

Longer Mast

  Choice of Mud Pumps
  Choice of Hydraulic pumps
  Hydraulic Breakout System
  Air clutches 
  Diesel generating set for lighting DTH attachments for drilling by DTH method 
  Casing drum
  Hydraulic leveling jacks 
  Chain pull down having stroke length of 20 feet.
   
 

DOWN-THE-HOLE HAMMER DRILL [DTH 300]

DOWN-THE-HOLE HAMMER DRILL [DTH 300]
These are meant for drilling borehole in hard compact formation (Rock Drilling). They combine both percussion and rotary action with air media. Sometimes Air Rotary DTH are provided with mud pump for negotiating the overburden

 

   
RATED CAPACITY
   
 

Up 115 mm dia , to a depth of 100 Mtrs

   
ANGLE HOLE DRILLING :
   
 

upto 30 Degrees to vertical.

   
PULL DOWN PRESSURE:
   
 

Variable to 800 Kgs. (1760 lbs) Feed Length - Suitable for 3 Mts. Drill Rods.

   
HOISTING CAPACITY:
   
 

1200 Kgs. (2640 lbs)

   
AIR COMPRESSOR:
   
 

8.5 M3 at 7 Kg/cm2 (300 CFM at 100 PSI) Driven by independent diesel engine.

   
ROTATION HEAD:
   
 

Hydraulic Top Drive Head: Variable speed 0 to 60 RPM.

   
POWER UNIT:
   
  For Rig from Truck Engine through power take off; independent diesel engine for compressor.
   
MOUNTING:
   
 

Truck, OPTIONAL Trailer, or Crawler Track.

   

LEVELING JACKS:

   
 

4 Nos. Mechanical jacks

   

MAST (BOOM):

   
 

Structural steel 4865 mm long.

  Ground Clearance 300 mm
  Sliding stroke 750 mm
  Effective Downward stroke 450 mm.
   

DRILL ROD:

   
 

73/76 mm x 3 mts (2 7/8"/3" x 10') long.

   
HYDRAULIC SYSTEM:
   
 

Two individual Circuits, Maximum pressure 70 Kg/cm^2 ,Total Oil displacement 130 LPM

   
HYDRAULIC RESERVOIR:
   
 

Capacity 250 Liters.

   
AIR LINE LUBRICATOR:
   
 

8 Liters.

   
OPTIONAL:
   
 

Hydraulic Break Out Cylinder,

  Dust Extractor
   Foam/ Water injection Device.
   
SPECIAL FEATURES:
   
 

Suitable for Water Well drilling and exploration holes

  Robust Components designed easily mounted on Truck
  Quicker set up because of hydraulic cylinders.
  Hydraulic pull down System
  Hydraulic feed gives required pull down force while rotation control gives rotation to the Down the Hole Hammer.
   
 

DOWN-THE-HOLE HAMMER DRILL [DTH 500 spl]

DOWN-THE-HOLE HAMMER DRILL [DTH 500 spl]  
   
RATED CAPACITY
   
 

165 mm dia. Holes upto 180 mtrs. by DTH method in hard rock and 203/215 mm dia. Holes upto 180 mtrs by mud rotary method in alluvial soil. Larger Hole by mud Rotary method through reaming operation.

   
PULL DOWN:
   
 

Through hydraulic cylinder and wire rope. Pull down force variable upto 12,500 Kgs. Micro-Feed’ and Hold-back arrangement.

   
PULL UP (HOISTINNG)
   
 

Variable upto 8500 Kgs.(High speed hoisting provided.)

   
ROTATION HEAD
   
 

Top drive hydraulic motor driven through gear train immersed in oil bath providing infinitely variable speeds of 0-100 / 0-150 RPM.

   
AIR COMPRESSOR
   
 

17 mt.3/min at 10 kg./cm2 (600 CFM ,150 PSIG), Rotary screw type, driven by its own separate diesel engine.

   
MUD PUMP
   
 

‘PRECISION’ make model S-125 duplex double acting reciprocating mud pump having 5” stroke and fitted with 4.1/2”  liner capable of delivering 550 LPM and a maximum pressure of 13.85 Kg/cm2

   
MOUNTING
   
 

‘4 x 4 / 6 x 4 drive Ashok Leyland / TATA Truck Chassis.

   
POWER UNIT
   
 

Rig including mud pump driven by truck engine through power take off. Compressor driven by independent diesel engine.

   

MAST

   
 

Heavy duty structural steel / tubular tube construction electrically welded capable of handling 6.1 mtrs. (20’) long drill rods. Mast raised and lowered by hydraulic cylinder. 

   

HYDRAULIC SYSTEM

   
 

Comprising of hydraulic pumps, control valves, reservoir, etc.

   

LEVELLING JACKS

   
 

4 Nos. Hydraulic leveling jacks with safety check valves provided.

   
AIR LINE LUBRICATOR
   
 

13.5 Ltrs. Capacity provided.

   
WATER/FOAM INJECTION SYSTEM
   
 

Provided on Rig.

   
 
AUXILIARY WINCH
   
 

5000 Kgs. Capacity hydraulic motor driven Auxiliary winch provided.

   
BREAK-OUT SYSTEM
   
 

Hydraulically operated. 

   
DRILL ROD RECOMMENDED
   
 

89mm OD / 73mm OD - 6 Mtrs. / 3 Mtrs. external flush type drill rods with joints as per API standard.

   
OPTIONAL
   
 

Mounting  on two truck concept

  Choice of Compressors
  Reciprocating pump operated water injection system
  Hydraulically operated jib Boom  on the top of the mast.
  ODEX system for simultaneous casing lowering
   
 

Precision Cable Tool Percussion Drilling Rig Model

Precision Cable Tool Percussion Drilling Rig Model Percussion Rigs are suitable for clayish formations and bouldry strata. These drills are provided with engines of adequate horsepower for chisel action of the bit and bailing the cuttings from the hole.
   

Model:

CP 20

Tool Weight:

2000 Kgs (4400 lbs)

Rated Capacity

Hole Diameter (mm) Tool Weight (Kgs) Depth (Meters)
510/ 610 1735 213
460 1610 305
360 1531 366
250/300 1442 431
200 1202 610
150 998 762
Spudding Beam  
Construction                          :

All steel Electrically welded box type construction sheaves travel full width of the bull reel drum and driven by 'V' Belt.

Stroke Length                        : 400 mm, 600 mm, 800 mm, 1000 mm
No. of stroke / min. 30-50

Bull Reel

 
Spool Dia. 270 mm
Spool Length 775 mm
Flange Dia. 1000 mm
Brake Drum Dia. 775 mm
Brake Width 100 mm
No. of Brake 2 Nos.

Sand Reel

 
Spool Dia 220 mm
Spool Length 800 mm
Flange Dia. 675 mm
Brake Drum Dia. 600 mm
Brake Width 100 mm
No. of Brake 2 Nos.

Casing / Calf Reel

 
Spool Dia, 220 mm
Spool Length 500 mm
Flange Dia. 675 mm
Brake Drum Dia. 600 mm
Brake Width 100 mm
No. of Brake 2 Nos.
Mast  

Construction

Double Pole Telescopic type

Length

17.18 mtrs. (55 feet) [Optional 12.8 mts.(41 feet) ]

Rated Capacity

45,360 Kgs. (1,00,000 lbs)

Raising, Lowering and Telescoping

Separate Drum through wire ropes

Sheaves :

(All sheaves are made out of steel)

Drilling Crown Sheave

500 mm dia,

Casing Reel Sheave

500 mm Dia. (2 Nos.),  300 mm Dia. (1 No.)

Sand Line Crown Sheave

500 mm Dia.

Sand Line Guide Sheave

300 mm Dia.

Heel Sheave

500 mm Dia.

Spudding Sheave

500 mm Dia.

Mounting

2 to 3 axle truck / Trailer or semi Trailer

Priming

Diesel Engine of 106 H.P. at 2400 RPM

Power Drive

'V' Belts and Roller Chains

 
 

DTH 4-100 DT

DTH 4-100 DT  
   
MAKE & MODEL:
   
  "PRECISION" Model DTH-4-100DT Hydraulic operated Crawler mounted Tow Hole Drill.
   

RATED CAPACITY:

   
  4" [100mm] to 4.1/2" [115mm] dia. Holes using 2.7/8" [73mm] OD Drill Pipes 30 meters depth.
   

PULL DOWN / PULL UP:

   
  Hydraulic motor driven chain pull down system with a provision of micro feed arrangement.
   

ROTARY DRIVE SYSTEM:

   
  Top drive hydraulic speed 0 to 60 RPM infinitely variable and constant torque of 7000 in.lbs [80 Kg.Mtrs.]
   

MOUNTING:

   
  Heavy duty crawler driven by independent hydraulic motors. Grade ability 1 in 10. Travel speed 1.5 KMPH. The drill can tow a portable compressor.
   

MAST:

   
  Electrically welded heavy duty structural steel suitable to handle 10 Feet [3 Mtrs.] long drill pipes. Mast can be raised and lowered by hydraulic cylinder. The boom can operate :
   
  Above horizontal - 45 degrees
  Below horizontal - 20 degrees
  Mast dump - 120 degrees
   

DRILL ROD:

   
  2.7/8" [73mm] OD x 10 Ft. [3 Mtrs.] long.
   

AIR LINE LUBRICATOR:

   
  Provided as a standard.
   

BREAKOUT SYSTEM:

   
  Provided as a standard.
   

HYDRAULIC SYSTEM:

   
  The hydraulic system includes motor, pumps, valves, piping, reservoir, etc. Laid out on the deck itself.
   

LEVELLING JACKS

   
 

4 Nos. Hydraulic leveling jacks with safety check valves provided.

   

RECOMMENDED AIR COMPRESSOR:

   
  250 / 300 CFM - 100 PSI Compressor for driving all air motors and flushing operation
   
 

DTH 4-100 D/E, Diesel & electric Driven

DTH 4-100 D/E, Diesel & electric Driven  
   
RATED CAPACITY:
   
  Upto 100/115mm to a depth of 30 mtrs. (100 ft.)
   
ANGLE HOLE DRILLING (OPTIONAL):
   
  Drill can be fitted for angle drilling to drill 0-25 Degrees in step of 5 Degrees.
   
PULL DOWN PRESSURE:
   
  Variable to 7,500 Kgs (16560 lbs) through hydraulic cylinder.
   
AIR COMPRESSOR:
   
  10.3 m3/min at 7 kg/cm2 (365 CFM / 100 PSI) rotary vane type compressor.
   
ROTATION HEAD:
   
 

Hydraulic top drive head, variable speed 0 to 100 RPM Torque 300 kg.mt. (2172ft. lbs)

   
POWER UNIT:
   
  Single Diesel Engine driven developing around 170 H.P. for driving compressor and hydraulic system through power take off arrangement.
   
MOUNTING:
   
  Individual crawler track control gives full maneuverability on narrow benches. Pads are 16" wide triple grouser.
   
LEVELLING JACKS:
   
  4 Nos. Hydraulic leveling jacks individually controlled.
   
MAST:
   
  6.7 M. High (22 ft.).Electrically welder tubular construction suitable for 4.5M (15 Ft.) long drill rod.
   
DRILL RODS:
   
  73mm / 76mm x 4.5 mtrs (15 Ft.) long drill rod with 23/8" API REG. Box and pin connection (OTHER SIZES AVAILABLE ON REQUEST)
   
ROD CHANGER:
   
  Pivoted rod changer can carry 5 Nos. of 4.5 mtrs. (15 Ft.) long drill rods in a rotary fixture.
   
BREAK OUT WRENCH:
   
  Break out wrench positioned hydraulically from the cab.
   
HYDRAULIC SYSTEM:
   
  Three individual circuits. Total oil displacement 58 GPM (219 LPM) maximum pressure 140 kg/cm2 (2000 PSI)
   
DUST COLLECTOR:
   
  The drill is equipped with low maintenance, compact dry type dust collector (LMP DC-300 Series).
   
CONTROL:
   
  The drill is equipped with low maintenance, compact dry type dust collector (LMP DC-300 Series).
   
OPTIONALS :
   
  Choice of compressor,
  Twin diesel engine, one for air compressor and other for hydraulic system.
  Single electric motor.
  Night lighting arrangement.
  Air line lubricator.
  Water Injection System
  Twin electric motor, one for air compressor and other for hydraulic system.
  PC Based Data Logger.
   
 

Dimensions

  In meters
A 9.08
B 2.8
C 3.6
D 8.45
E 2.7
F 1.05
G 3.2
H -
 
 

Rotary Blast Hole Drill

Rotary Blast Hole Drill One of our most popular drills within the Indian market... for drilling small diameter blast holes in tough formation, nothing beats the RBH-6-100. It is a self-propelled crawler mounted machine which means rapid deployment from location to location. The RBH-6-100 is designed for speed. Its rotary drive system is capable of operating at upto 135 RPM.
   
RATED CAPACITY:
   
  5.1/2" [140mm] to 6.1/2" [165mm] dia. Holes using 4.1/2" [114mm] /5" [127mm] OD drill rods upto 30 Mtrs.
   
PULL DOWN:
   
  Through hydraulic cylinder and wire rope / chain system variable upto 16363 Kgs. [36000 lbs]
   
ROTARY DRIVE SYSTEM:
   
  Hydraulic top drive head. Multiple motor and sturdy gear box. Speed infinitely variable 0-135 RPM. Torque variable upto 44000in lbs [508 Kg.mt.]
   
AIR COMPRESSOR:
   
  21.2 mt3/min. at 7 Kg./cm2 [750 CFM 100 PSIG]/ Rotary screw type compressor.
   
ROTATION HEAD:
   
 

Hydraulic top drive head, variable speed 0 to 100 RPM Torque 300 kg.mt. (2172ft. lbs)

   
POWER UNIT:
   
  Single Diesel Engine driven developing around 170 H.P. for driving compressor and hydraulic system through power take off arrangement.
   
MOUNTING:
   
  Individual crawler track control gives full maneuverability on narrow benches. Pads are 16" wide triple grouser.
   
LEVELLING JACKS:
   
  4 Nos. Hydraulic leveling jacks individually controlled.
   
MAST:
   
  6.7 M. High (22 ft.).Electrically welder tubular construction suitable for 4.5M (15 Ft.) long drill rod.
   
DRILL RODS:
   
  73mm / 76mm x 4.5 mtrs (15 Ft.) long drill rod with 23/8" API REG. Box and pin connection (OTHER SIZES AVAILABLE ON REQUEST)
   
ROD CHANGER:
   
  Pivoted rod changer can carry 5 Nos. of 4.5 mtrs. (15 Ft.) long drill rods in a rotary fixture.
   
BREAK OUT WRENCH:
   
  Break out wrench positioned hydraulically from the cab.
   
HYDRAULIC SYSTEM:
   
  Three individual circuits. Total oil displacement 58 GPM (219 LPM) maximum pressure 140 kg/cm2 (2000 PSI)
   
DUST COLLECTOR:
   
  The drill is equipped with low maintenance, compact dry type dust collector (LMP DC-300 Series).
   
CONTROL:
   
  The drill is equipped with low maintenance, compact dry type dust collector (LMP DC-300 Series).
   
OPTIONALS :
   
  Choice of compressor,
  Twin diesel engine, one for air compressor and other for hydraulic system.
  Single electric motor.
  Night lighting arrangement.
  Air line lubricator.
  Water Injection System
  Twin electric motor, one for air compressor and other for hydraulic system.
  PC Based Data Logger.
   
 

Dimensions

  In meters
A 9.08
B 2.8
C 3.6
D 8.45
E 2.7
F 1.05
G 3.2
H -
 
 

10 Inch Class Electric Driven Blast hole Drill

10 Inch Class Electric Driven Blast hole Drill One of our most popular drills within the Indian market... for drilling small diameter blast holes in tough formation, nothing beats the RBH-6-100. It is a self-propelled crawler mounted machine which means rapid deployment from location to location. The RBH-6-100 is designed for speed. Its rotary drive system is capable of operating at upto 135 RPM.
   
Rated capacity:
   
  7 7/8"(20 cm) - 11" (28 cm) dia. Holes using 6 1/2" (16.5 cm) 8 5/8" (21.9 cm) OD drill rod
   
Pull down:
   
  Through hydraulic cylinder and chain system 70000 lbs (31798 kgs)
   
Rotary drive system:
   
  Hydraulic top drive through closed loop system using axial piston motor of 150 HP, Rotational speed infinitely variable 0-135 RPM.
   
Air compressor:
   
  Rotary twin screw compressor delivering 1200 cfm (33.9 cu.m/min) @ 100 psig (7.kg/cm2)
   
Power system:
   
  500 HP 3300V/6600V TEFC motor
   
Rod handling:
   
  Automatic rod changer with indexing to carry 3 rods (total 4-rods on drill)
   
Drill rod:
   
  8.5/8" (21.9 cm) OD x 35 ft (10.7 m) long with BECO threads.
   
Hydraulic system:
   
  Comprising of two numbers axial piston for powering rotary head and track. The gear type pumps are use for driving for powering auxiliary operation like Mast Raising - Lowering, Leveling Jacks, Breakout system etc.
   
Crawler propel:
   
  Powered by axial piston motors total power 300 HP through planetary drive. Propel speed 2.8 kmph and gradeability 40% Track width 30" (76.2cm).Overall crawler length 218" (554cm) ground pressure 12.2 psig (0.80 kg/cm2)
   
Leveling system:
   
  Two rear jacks of 36" (91.44 cm) stroke and one front jack of 48" (121.92 cm) stroke jacks provided with safety check valves.
   
Mast:
   
  Heavy duty tubular steel mast raised or lowered by two hydraulic cylinders fitted with safety check valves, mast provided with air actuated locking system.
   
Dust control:
   
  The drill is equipped with low maintenance, compact dry type dust collector(LMP DC-300 Series).
   
Operators cab:
   
  Two man cab provided as standard. All controls and gauges are located in a wide and completely steel and glass cab.
   
Control console:
   
  All drilling functions are monitored and controlled from a control panel through push-pull Bowden cables, logically arranged in functional groups, valve bank is placed outside the cabin for easy maintenance.
   
Other standard fitment:
   
  Hydraulic breakout wrench, bit adapter, bit basket , night lighting , 8000 lbs auxiliary winch, table bushing, air operated slap wrench and a set of standard tools.
   
OPTIONAL:
   
  Water injection system.
  6 ft (183 cm) high machinery housing cover for deck with cat walk and including automatic fire extinguishing system.
  Cab insulation.
  Higher capacity.
  Angle hole drilling kit.
  PC Based Data Logger.
   
  Dimensions
 
  In meters
A 14.5
B 2.99
C 4.95
D 13.11
E 3.33
F 1.33
G 4.56
H 3.4
 
 

DOWN-THE-HOLE HAMMER DRILL [DTH 350]

DOWN-THE-HOLE HAMMER DRILL [DTH 350]
These are meant for drilling borehole in hard compact formation (Rock Drilling). They combine both percussion and rotary action with air media. Sometimes Air Rotary DTH are provided with mud pump for negotiating the overburden.
   
RATED CAPACITY
 

115 mm diameter. Holes up to 120 meters, by DTH method in hard rock and 165 mm diameter.  Holes up to 120 meters. By mud rotary method in alluvial soil.

PULL DOWN:
 

Through hydraulic cylinder and wire rope, pull down force variable up to 5000 kgs. " Micro-Feed" arrangement provided

PULL DOWN (HOSTING):
 

Variable up to 6690 Kgs.

ROTATION HEAD:
 

Top Drive hydraulic motor driven through gear train immersed in oil bath providing infinitely variable speeds of O-100 RPM

AIR COMPRESSOR:
 

11.5 mt. 3/min at 7 Kg/cm2 (4000 CFM 100 PSIG) Rotary screw type, driven by its own separate diesel engine.

MUD PUMP:
 

PRECISION' Model 'S-125 Duplex Double acting reciprocating Mud pump having 5" stroke and fitted with 4" liner cable of delivering 450 LPM and a maximum working pressure of 17.5 kg/cm2

MOUNTING:
 

4 x 2 drive truck chassis.

POWER UNIT:
 

Rig including mud pump driven by truck engine through power take off.

MAST:

 

Heavy duty structural steel construction electrically welded capable of handling 4.5 meters. (15') Long drill rod. Mast raised and lowered by hydraulic cylinder.

HYDRAULIC SYSTEM:

 

Comprising of Hydraulic pumps, Control valves, reservoir, etc. Total oil displacement around 130 LPM at a pressure of 100 kg/cm2

LEVELLING JACKS:

 

4 Nos. Mechanical screw jacks provided

AIR LINE LUBRICATOR:
 

8 Ltrs. Capacity provided.

DRILL ROD RECOMMENDED:
 

73/76mm x 4.5 meters. (2 7/8" x 15') long.

 
OPTIONAL:
   
4 x 4 drive truck chassis for mounting
Choice of Compressors
Pull down system through hydraulic cylinder and chain
Hydraulic leveling jacks.
Mast Suitable to carry 3 mtrs. (10') long drill rod.
Auxiliary winch having 3000 kgs, capacity.
Water/Foam injection system.
ODEX system for simultaneous casing lowering
Hydraulic break out system
 

Mud Pumps

LMP PRECISION also manufactures mud pumps and Turbine Pumps for mud circulation applications in Direct Circulation rotary / core drilling, mud handling/transmission from mining pits. Crude oil and mud slurry handling in oil fields. They can also be used for handling cement slurry water handling from deep / tube wells.

 
Rotaham Series
Mud Pumps

LMP Mud pumps are duplex double acting reciprocating type made from a single piece alloy casting capable of handling high discharge and high pressure applications

Ideally suitable for seismograph survey, water well, oil well, core drilling mud and cement service applications.

Continuous tooth herring bone gears fitted with eccentric for easy and economical replacement.

5 Models to choose from: S-125, S-150, S-200.

Stroke -5 " to 8 ".
Mounting on a truck, trailer or skid.
Prime mover diesel engine.

THE S-SERIES OF ‘PRECISION ‘ Duplex mud Pumps is the result of over two decades of incessant research and development by a young team of painstaking engineers, working with an ‘India-can-do-it’ mood. They are backed by their close association with advanced Pump Technology and actual on-the-field experience.

VERSATILE: ‘PRECISION’ Duplex Mud Pumps are suitable for a wide range of applications. They are ideal for seismograph survey, water-well and core drilling operations, Mud and Cement Services, in Shallow crude oil-well drilling. They are also used for water supply, boiler feed and general industrial services.

Power End: Single-piece alloy iron casting for rigidity.

Bearing: Main bearings are tapered roller adjustable type.

Gears: Continuous tooth herring bone gears, fitted with eccentric for easy and economical replacement.

Connection Rod: Nodular iron solid construction. Crank end has high-lead bronze bushing. Cross head end has bronze bushing.

Crossheads: Solid-type alloy iron, reinforced around extra large crosshead pin.
Crosshead Liners: Replaceable type.
Lubrication: All internal work parts are flood lubricated from large reservoir in crank case. Main and Jackshaft roller bearings are grease lubricated.
Fluid End: Valve pot type, of alloy iron, with separate bolted valve cover over each valve.
Fluid Liners: Removable, interchangeable within each size group, gives wide range pressures and capacities in any single pump.
Fluid Pistons: Taper fitted to piston rods. Different materials and types available.
Fluid Valves: Bottom stem-guided or wing-guided. Of various materials to suit conditions. Individually accessible for services.
Piston Rods: Made of steel. Taper fitted to pistons.
Surge Chamber: Protects pumps, hoses and related equipment from surge damage.
 

RIGHT ANGLE GEAR HEAD

   
APPLICATIONS
   
  The “PRECISION” Right Angle Gear Drive provides the most economical efficient, and positive power transmission from Horizontal mover to Vertical pump shaft. The gear drive eliminates long quarter turn belts, which are not only expensive to install, operate and maintain, but are considerably less efficient, are affected by climatic conditions and require large floor space.

The “PRECISION” Right Gear Drive is used in pumping like irrigation, Municipal supply and sewage disposal, fire and flood protection, cooling towers and marine services.

The “PRECISION” Right Angle Gear Drive manufactured in a variety of models to meet specific requirements of high and slow speed prime movers and pumps having wide range of size and type.
   
SPECIFICATIONS OF Precision BRAND
   
  The Right Angle Gear Head comprises of a pair of Bevel gears, right angle to each other mounted with suitable bearings fitted in a C.I. Chamber and bearing housings, manufactured from closed grained C.I. confirming to Grade 20 ISI 210.

GEARS:
Spiral Bevel Gears are used to ensure smooth and silent operation. They are made out of special Alloy Steel. Lapped and case hardened Gears are adjustable to achieve best possible tooth contact, and transmission effiency 97% to 99%.

BEARINGS:
Double row angular contact thrust bearings and ball bearing are provided at the top and bottom of the vertical hollow shaft respectively, and they are capable to take complete hydraulic down thrust. The horizontal driving shaft is mounted on double row angular contact thrust bearing and ball bearing to take thrust load of gears and driving arrangement.

SHAFT
Vertical hollow shaft and horizontal driving shaft are designed to transmit the rated power and adopt top shaft of pump and driving arrangement of pulleys of universal joint shaft respectively

LUBRICATION
The Oil pump, provided in the oil bath lubricates ball bearings and gears.

COOLING
Lubricating oil is cooled by pumping water flowing through the cooling coil.

‘PRECISION’ Right Angle Gear Heads are manufactured with speed ratios 1:1, 1:2, 2:1 and other ratios on request. They can be mounted easily on discharge heads of Turbine Pumps manufactured as per ISS 1710:1972.
 

Turbine Pumps

Turbine Pumps Our Vertical Turbine Pumps are available from 3 H.P. to 300 H.P. having capacity 150 LPM to 25000 LPM at various Heads. These pumps are of oil lubricated or water lubricated type and are driven by Electric Motor, Diesel Engine or by Tractor. Pumps are install on open well, Sump or on Tube well. Application in drinking water, industrial application and irrigation purposes.
   
BOWLS  
BOWLS The bowl assemblies are made of close-grained cast iron [with a small percentage of nickel to increase the density of metal]. They are hydraulically profiled to reduce friction to the water flowing upward and to convert high velocity into pressure head to peak efficiency and performance. The inner surface is coated with anti-corrosive paint. The bowls house the impellers and bronze bearing. Flanged joints connect two bowls with each other.
   
IMPELLERS:  
IMPELLERS
IMPELLERS
The vane angles of the impellers are carefully selected to achieve a higher manometric efficiency and the vanes are made extra-smooth to minimize hydraulic losses. The impellers are statically and dynamically balanced to the nearest working speed for a vibration less operation. This ensures a longer life. The impellers are machined accurately to match the contours of the bowls.

The running clearance of the impellers can be easily varied to change the capacity or to compensate for wear and differing well conditions while maintaining the same high capacity. Precision turbine pumps can give almost any combination of capacity and head by varying the type of impeller and the number of stages. The pumps can be fitted with closed impellers to draw clean; general-purpose water semi- open impellers can be supplied when sand, turbid water is to be drawn. Normally alloy cast iron impellers are supplied, but bronze impellers can be provided at marginal cost. The latter are indispensable when handling water containing mineral salts and sand or when hygienic water is required. Precision turbine pumps are almost universal in their application. They are engineered for normal use for pumping water from tube wells, deep wells, open wells, bore hole, lakes and rivers, They can be applied for general sump, condenser line and booster, transfer service, cooling tower, flood control and irrigation purposes, various wet and dry pit installations and for above floor level’ or ‘below ground’ suction and discharge. In fact precision turbine pumps can be installed to handle any quantity of water up to 25,00,000 liters per hour form depths up to 200 meters.
   
Suction Case:
Made of cast iron, the strong suction case is hydraulically contoured to guide a uniform flow to the impeller. It is fitted with long bronze bearing [for the impeller shaft], a sand collar and a sealing plug for sand-free running and sturdiness. The conical strainer at the bottom prevents large foreign solid particles from entering into the suction case.
 

COLUMN ASSEMBLY

 
COLUMN PIPES/RISING MAINS:
Water rises upwards between the casing pipes and these outermost heavy duty steel column pipes [API standard] which are made in standard lengths of 3 m. [10’] and or 1.5 m. [5’] with heavy duty external threads or with flanged joints. Column pipe couplings rigidly connect two column pipes.
 
SHAFT ENCLOSING TUBES/CASINGS:
The shaft enclosing tubes, from which oil passes downwards to lubricate the line shaft, prevent the oil mixing with pumped water, protect the line shaft, and also hold the line shaft bearing in alignment. [Naturally the casing pipe is eliminated in water lubricated pumps]. Available in 1.5 m. [5’] standard length, they are coupled with bronze spiral-grooved, threaded bush bearings. Chemically treated rubber guide spiders provided at suitable intervals stabilize vibrations. The casing pipe being eliminated in water lubricated pumps, the cast iron stabilize [guide spider] containing cut-less rubber bearing is screwed or flanged to the column pipe.
 
LINE SHAFT:  
LINE SHAFT The solid line shaft, rotated from top by the prime mover, is made of high-carbon steel, threaded and ground. This strong line shaft is designed for 25% overload capacity at maximum power Consumption, and is coated with a special “ASFOSIL” plastic coating for rust protection and increased life. In water lubricated pumps the line shaft rotates, in rubber bearing, with the stainless steel sleeves, which have internal threads. The sleeves are locked by the line shaft steel coupling, which at the same time couples the two line shafts in oil lubricated pumps the line shaft rune through bronze bearing and the sleeves are eliminated.
   
DISCHARGE CASE & TOP BOWL:
The body is made of close-grained cast iron. It is provided with outlet ports and long bearing, strong enough to guide the pump shaft for a vibration-free operation. The bearing is protected by a sand collar [bronze or plastic]. The stuffing box of the oil lubricated pump is provided with a bronze lantern ring and graphite asbestos gland packing to achieve perfect oil-water separation and to ensure a smooth oil lubrication system.
 

A SPECIAL FEATURE:

Imagine the cumbersome task of repairing a gland assembly, situated 100 meters below the ground, damaged by excessive water pressure. The discharge case of precision oil lubricated pumps features a special LABYRINTH bushing system [generally not found in other makes] which reduces the amount and pressure of water entering the stuffing box, thus preventing the direct action of water pressure on the gland packing. [The additional bronze bearing provided under the sand bushing also reduces the vibrations that would the disturb the packing].
 
COLUMN PIPES/RISING MAINS:
Water rises upwards between the casing pipes and these outermost heavy duty steel column pipes [API standard] which are made in standard lengths of 3 m. [10’] and or 1.5 m. [5’] with heavy duty external threads or with flanged joints. Column pipe couplings rigidly connect two column pipes.
 
THE 4 WAY SEALING FEATURE OF PRECISION TURBINE PUMPS:
THE 4 WAY SEALING FEATURE OF PRECISION TURBINE PUMPS The bowl and impeller assembly of precision turbine pumps have a special 4-way sealing feature which ensures a perfect non-leaking fitting reducing the loss of liquid through bypass. The diagram shows how horizontal surfaces. This helps maintain the maximum performance and efficiency of the pump.
   
WATER / OIL Lubrication
WATER / OIL Lubrication Whether you should select an oil or water lubricated system depends upon the type of water to be pumped, the type of installation and other factors. Major differences between the two types are in the column assembly bearing and in the discharge case. In a water lubricated pump, water is added before starting the pump to pre-lubricate the line shaft rubber bearings. The shaft enclosing tube [which separates the lubrication oil from discharge water in the oil lubrication pumps] is completely eliminated.

The extra shaft enclosing tube in oil lubricated pumps makes them sturdier, ensuring a smooth operation regardless of the frequency of starting and shutting of the pump. Such pumps are the ones most commonly used for irrigation and water supply schemes.
   
However, water lubricated pumps are indispensable when clear, cold, hygienic water free from oil and dirt is desired, Engineered to fulfill the complex design requirements and diversified needs of modern.

Industries, water supply and agriculture the precision oil lubricated/water lubricated turbine pumps save you time and money in performance and maintenance to give more water at lower cost per liter.
 
Precision turbine pumps can draw from 15000 to as much as 25,00,000 liters [330 to 5,50,000 gallons] of water per hour from up to 90 m. [330’] depth, [specially designed pumps reach as deep as 200 m] from the tube wells with a minimum diameter from 100 mm. to 650 mm. [4” to 26”] They are manufactured in a wide range of sizes from 65 mm. x 50 mm. to 400 mm. x 400 mm. [2.1/2” x 2” to 16” x 16”].
 
DRIVING ARRANGEMENT:
Precision turbine pumps are adaptable to of prime mover and driving arrangement. If electric power is available, the pumps can be driven with a vertical hollow or solid shaft motors. They can also be driven by means of a petrol/diesel engine or even a tractor which drives the pump through a V or flat belt pulley hand with a hollow shaft. A right angle drive too can be provided for the pump with an oil engine through a horizontal flexible shaft. The safeguard against power failure particularly in a power house, the combination of an electric motor and pulley or right-angle gear head ensure an unfailing continuous supply of water. The pump assemblies’ can-be run at speeds between 1440 to 2,880.rpm.
 

Dust Collector Principle

Dust Collector Principle

LMP Precision Make cyclone type dust collector system with dust collection box. Dry filters unit, blower fan driven by hydraulic motor or electrical motor.

   
Introduction:
The purpose of a dust collector unit is to make the working environment free of contamination and pollution. It greatly extends equipment life, protects the surrounding environment from contamination and guards against pulmonary and respiratory disease in operating personnel.
 
Operation of Dust Collector:
Dust is drawn into the dust chamber by the blower through dry filter elements which trap the dust particles and allow clean air to pass through the atmosphere. Dust is sequentially pulsed of the elements by compressed air and settles in the dust chamber from where it is released by gravity discharge.
 
Construction:
Constructed with heavy gauge steel sheets electrically welded built for lasting operation. The dust collector is equipped with an effective impeller driven by electric / hydraulic motor capable of a discharge up to 1200 cfm.
 
High Filtration Efficiency:
Provides cleaner air, even in extremely high dust concentration.
 
Self Cleaning:
The dust collector consists three numbers of high efficient dry filter elements with proven performance in heavy-duty applications. The filter elements are cleaned automatically through compressed air by electrical / electronic sequential timer.

Dust collector consists of a back manifold pressure regulating of 40 to 50 PSI and connected to three numbers pneumatic solenoid valves. A electronic self timer is provided with a setting of on time and off time. (The values are variable based on the flushing requirement of the application) During this cycle the solenoid valve will be operated accordingly and the air will be flushed to clean the filters.

The hydraulic / electrical motor provided to drive the impeller which suck the dust while operation. In this operation the heavy particles will be dumped through a flexible dump flap on the ground and the clean air will be discharge to atmosphere.

Ideally Suitable for blast hole drilling operations and other industrial uses like chemicals ,food products, metal working, pharmaceuticals industries where dust collection is essential for controlling pollution.
 
Typical Industrial Usage:
Flour Foodstuffs Cement Cereals
Detergents Fertilizers Metal compounds Minerals
Plastics Sugar Industries Tobacco Iron and steel
Chemicals Pharmaceuticals Coal Foundry sand
 
 
links