Lubi pumps |
3"(80mm) Radial flow
Submersible Motor & Pumps for Deep Wells 80 mm
Construction
- Submersible motor & pumps for deep wells of 3" (DN 80 mm).
- Delivery casing with built-in non-return valve.
- Impellers :
Radial flow impellers. N51BH,N52BH
- Connection : Screwed pipe connection.
Application
- For water supply.
- For irrigation.
- For civil and industrial applications.
Performance Range
- Head range up to 60 meters.
- Flow range up to 6.0 m³/h.
Operating conditions
- Water temperature up to 45°C.
- Max.Sand quantity in the water : 50 g/m³.
- Max.Starts per hour : 30 at regular intervals.
- Direction of rotation : Clockwise as seen from the pump coupling side.
|
|
|
| Send Mail |
3"(80mm) Submersible H3 Motor
Quality for your borewell :
H3 Motors are suitable for 3” borewell, and operate with permanent split capacitor. H3 Motors are the choice for dependable, maintenance-free operation, and provides a long life for your submersible pump operation.
Product features :
- Stainless steel outer shell and shaft.
- Maintenance free lubricated ball bearings.
- Rotation: Counter clock wise.
- Vertical & horizontal mounting position.
- High efficiency electrical design.(lower operating cost, Lower winding temperature).
- Cooling & lubrication by non toxic fluid.
- Motor for permanent split capacitor.
- Pressure compensation diaphragm.
- Continuous duty.
Specifications :
- Degree of protection : IP 68.
- Insulation class : F.
- Ambient temp. : 45°C.
- Minimum Cooling flow along the motor : 8cm/sec.
- Water pH : 6.5 - 8.0.
- Maximum no. Starts per hour : 30.
- Maximum submerged depth : 350 mts.
- Ratings : Single phase 0.37 KW - 0.75KW.
- Voltages : Single phase 230V +5%, -15% - 50Hz.
- Thrust load : 1000 N.
- Standard motor cable : Suitable for operation in drinking water. 1 X 1.5mm² X 3mts.
- Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.
- Special voltages, execution and material versions available on customer's request.
|
|
|
| Send Mail |
4" (100mm) Radial flow & Mixed flow
Submersible Motor & Pumps for Deep Wells 100 mm
Construction
|
|
|
| Send Mail |
4" (100mm) Radial flow & Mixed flow
Stainless Steel Submersible Motor & Pumps for Deep Wells 100 mm
Construction
|
|
|
| Send Mail |
4"(100mm) Submersible H4 Motor
Quality for your borewell :
H4 Motors are for operation with permanent split capacitor. H4 Motors are the choice for dependable, maintenance-free operation, and provide a long life for your submersible pump operation.
Product features :
- Stainless outer shell and shaft.
- Maintenance free lubricated bearings.
- Rotation: Single phase : CCW.
Three phase : CCW and CW.
- Vertical or horizontal mounting position.
- High efficiency electrical design.(lower operating cost).
- Tropicalized design. (Lower winding temperature).
- Cooling & lubrication by non toxic fluid.
- Motor for permanent split capacitor.
- 4" NEMA coupling flange.
- Pressure compensation diaphragm.
- Continuous duty.
Specifications :
- Degree of protection: IP 68.
- Insulation class : F.
- Ambient temp. : 45°C.
- Minimum Cooling flow along the motor : 8cm/sec.
- Water pH : 6.5 - 8.0.
- Maximum no. Starts per hour : 30.
- Maximum submerged depth : 350 mts.
- Ratings : Single phase 0.37 KW - 2.20KW.
Three phase 0.37 KW - 5.50 KW.
- Voltages : Single phase 230V +5%, -15% - 50Hz.
Three phase 230V +5%, -15% - 50Hz.
400V +10%, -15% - 50Hz.
- Thrust load : 3000 N (0.37 KW - 3.00 KW).
4000 N (3.70 KW - 5.50 KW).
- Standard motor cable : Suitable for operation in drinking water 1 X 1.5mm² X 3mts
- Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.
On Request :
- AISI 304 / 316 Stainless Steel Construction.
- Special Voltages.
- Double cable for Star - Delta operation.
|
|
|
| Send Mail |
4"(100mm) Submersible L4 Motor
Quality for your borewell :
L4 Motors are designed so that they can be easily rewound and repaired. They are high torque capacitor start and run design. They are built to provide maintenance-free, long life submersible pump operation.
Product features :
- Easily rewindable (wet wound) induction motor with PVC / PE insulated windings.
- Water lubricated radial and axial thrust bearing.
- Corrosion resistant AISI 304 S.S. Stator jacket.
- Non-contaminating water filling designed.
- High efficiency electrical design, lower operating cost.
- Tropicalized design. (Lower winding temperature.)
- Capacitor start and run design.
- Pressure compensation diaphragm.
- Continuous duty.
Specifications :
- Degree of protection: IP 58.
- Insulation class : B.
- Ambient temp. : 45°C.
- Minimum Cooling flow along the motor : 8cm/sec.
- Water pH : 6.5 - 8.0.
- Maximum no. Starts per hour : 30.
- Maximum submerged depth : 350 mts.
- Ratings : Single phase 0.37 KW - 2.20KW.
Three phase 0.37 KW - 5.50 KW.
- Voltages : Single phase 230V +5%, -15% - 50Hz.
Three phase 230V +5%, -15% - 50Hz.
400V +10%, -15% - 50Hz.
- Thrust load : 4000 N.
- Standard motor cable : Suitable for operation in drinking water
1 X 1.5mm² X 3mts. Single phase 0.37 KW - 0.75 KW
1 X 2.5mm² X 3mts. Single phase 1.10 KW - 2.20 KW
1 X 1.5mm² X 3mts. Three phase 0.37 KW - 4.40 KW
1 X 2.5mm² X 3mts. Three phase 5.50 KW
- Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.
- Special voltages, execution and material versions available on customer's request.
On Request :
- AISI 304 / 316 Stainless Steel Construction.
- Special Voltages.
- Double cable for Star - Delta operation.
|
|
|
| Send Mail |
6"(150mm) Radial flow & Mixed flow
Submersible Motor & Pumps for Deep Wells of 150 mm
Construction
|
|
|
| Send Mail |
6"(150mm) Radial flow & Mixed flow
Stainless Steel Submersible Motor & Pumps for Deep Wells of 150 mm
Construction
|
|
|
| Send Mail |
6"(150mm) Submersible H4 Motors
Quality for your borewell :
H6 Motors are Oil filled Submersible Motors suitable for minimum 6” borewell and three phase power supply. They are built to provide maintenance-free, long life submersible pump operation.
Product features :
- Stainless steel outer shell and shaft.
- Maintenance free lubricated ball bearings.
- Mechanical shaft seal.
- Rotation : CCW and CW.
- Vertical & horizontal mounting position.
- High efficiency electrical design.(lower operating cost)
- Tropicalized design. (Lower winding temperature.)
- Cooling & lubrication by non toxic fluid.
- 6" NEMA coupling flange.
- Pressure compensation diaphragm.
- Continuous duty.
Specifications :
- Degree of protection: IP 68.
- Insulation class : F.
- Ambient temp. : 45°C.
- Minimum Cooling flow along the motor :
15cm/sec. (3.00 KW - 15.0 KW)
30cm/sec. (16.5 KW - 37.0 KW)
- Water pH : 6.5 - 8.0.
- Maximum no. Starts per hour : 20.
- Maximum submerged depth : 350 mts.
- Special voltages, execution and material versions available on customer's request.
- Ratings : Three phase 3.00 KW - 37.0 KW.
- Voltages: Three phase 400V +10%, -15% - 50Hz.
- Thrust load:
10000 N (3.00 KW - 22.0 KW)
20000 N (26.0 KW - 37.0 KW)
- Standard motor cable : Suitable for operation in drinking water
1 X 1.5 mm² X 3mts. (3.00 KW - 7.50 KW)
1 X 2.5 mm² X 3mts. (9.30 KW)
1 X 4.0 mm² X 3mts. (11.0 KW - 13.0 KW)
1 X 6.0 mm² X 3mts. (15.0 KW - 16.5 KW)
1 X 10.0 mm² X 3mts. (18.5 KW - 22.0 KW)
1 X 16.0 mm² X 3mts. (26.0 KW - 30.0 KW)
1 X 25.0 mm² X 3mts. (37.0 KW)
- Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.
On Request :
- AISI 304 / 316 Stainless Steel Construction.
- Built-in PT 100 temperature sensor.
- Special Voltages.
- Double cable for Star - Delta operation.
|
|
|
| Send Mail |
6"(150mm) Submersible L6 Motor
Quality for your borewell :
L6 Motors are water filled motors which are easy to rewind and repair. They are built to provide maintenance-free, long life submersible pump operation.
Product features :
- Easily rewindable (wet wound) induction motor with PVC / PE insulated windings.
- Water lubricated radial and axial thrust bearing.
- Corrosion resistant AISI 304 S.S. Stator jacket.
- Non-contaminating water filling Design.
- High efficiency electrical design, lower operating cost.
- Tropicalized design. (Lower winding temperature.)
- Pressure compensation diaphragm.
- Continuous duty.
Specifications :
- Degree of protection: IP 58.
- Insulation class : B.
- Ambient temp. : 45°C.
- Minimum Cooling flow along the motor :
15cm/sec. (3.00 KW - 15.0 KW)
30cm/sec. (16.5 KW - 37.0 KW)
- Water pH : 6.5 - 8.0.
- Maximum no. Starts per hour : 20.
- Maximum submerged depth : 350 mts.
- Ratings: Three phase 3.00 KW - 37.0 KW.
- Voltages: Three phase 400V +10%, -15% - 50Hz.
- Thrust load : 15500 N (3.00 KW - 11.0 KW).
27500 N (13.0 KW - 37.0 KW).
- Standard motor cable : Suitable for operation in drinking water.
1 X 1.5mm² X 3mts.(3.00 KW - 7.50 KW)
1 X 2.5 mm² X 3mts. (9.30 KW)
1 X 4.0 mm² X 3mts. (11.0 KW - 13.0 KW)
1 X 6.0 mm² X 3mts. (15.0 KW - 16.5 KW)
1 X 10.0 mm²X 3mts. (18.5 KW - 22.0 KW)
1 X 16.0 mm²X 3mts. (26.0 KW - 30.0 KW)
1 X 25.0 mm²X 3mts. (37.0 KW)
- Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.
On Request :
- AISI 304 / 316 Stainless Steel Construction.
- Mechanical seal.
- Built-in PT 100 temperature sensor.
- Special Voltages.
- Double cable for Star - Delta operation.
|
|
|
| Send Mail |
6"(150mm) Submersible L6 Motor
Quality for your borewell :
L6 Motors are water filled motors which are easy to rewind and repair. They are built to provide maintenance-free, long life submersible pump operation.
Product features :
- Easily rewindable (wet wound) induction motor with PVC / PE insulated windings.
- Water lubricated radial and axial thrust bearing.
- Corrosion resistant AISI 304 S.S. Stator jacket.
- Non-contaminating water filling Design.
- High efficiency electrical design, lower operating cost.
- Tropicalized design. (Lower winding temperature.)
- Pressure compensation diaphragm.
- Continuous duty.
Specifications :
- Degree of protection: IP 58.
- Insulation class : B.
- Ambient temp. : 45°C.
- Minimum Cooling flow along the motor :
15cm/sec. (3.00 KW - 15.0 KW)
30cm/sec. (16.5 KW - 37.0 KW)
- Water pH : 6.5 - 8.0.
- Maximum no. Starts per hour : 20.
- Maximum submerged depth : 350 mts.
- Ratings: Three phase 3.00 KW - 37.0 KW.
- Voltages: Three phase 400V +10%, -15% - 50Hz.
- Thrust load : 15500 N (3.00 KW - 11.0 KW).
27500 N (13.0 KW - 37.0 KW).
- Standard motor cable : Suitable for operation in drinking water.
1 X 1.5mm² X 3mts.(3.00 KW - 7.50 KW)
1 X 2.5 mm² X 3mts. (9.30 KW)
1 X 4.0 mm² X 3mts. (11.0 KW - 13.0 KW)
1 X 6.0 mm² X 3mts. (15.0 KW - 16.5 KW)
1 X 10.0 mm²X 3mts. (18.5 KW - 22.0 KW)
1 X 16.0 mm²X 3mts. (26.0 KW - 30.0 KW)
1 X 25.0 mm²X 3mts. (37.0 KW)
- Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.
On Request :
- AISI 304 / 316 Stainless Steel Construction.
- Mechanical seal.
- Built-in PT 100 temperature sensor.
- Special Voltages.
- Double cable for Star - Delta operation.
|
|
|
| Send Mail |
8" (200mm) Radial Flow & Mixed flow
Stainless Steel Submersible Motor & Pumps for Deep Wells 200 mm
Construction
- Submersible motor & pumps for deep wells of 8" (DN 200mm)
- Sized for connection to the motor according to NEMA standards.
- Delivery casing with built-in non-return valve.
- Impellers :
 Mixed flow impellers.
W77,W95.
- Connection: Screwed pipe connection
Application
- For water supply.
- For irrigation.
- For civil and industrial applications.
- For fire fighting application.
Performance Range
- Head range up to 410 meters.
- Flow range up to 120 m³/h.
Operating conditions
- Water temperature up to 45°C.
- Max. Sand quantity into the water : 50 g/m³.
- Max. Starts per hour : 20 at regular intervals.
- Direction of rotation : Clockwise as seen from the pump coupling side.
|
|
|
| Send Mail |
8" (200mm) Radial Flow & Mixed flow
Submersible Motor & Pumps for Deep Wells 200 mm
Construction
|
|
|
| Send Mail |
8"(200mm) Submersible L8 Motor
Quality for your borewell :
L8 Motors are water filled motors which can be easy to rewind and repair. They are built to provide maintenance-free, long life submersible pump operation.
Product features :
- Easily rewindable (wet wound) induction motor with PVC / PE insulated windings.
- Water lubricated radial and axial thrust bearing.
- Corrosion resistant AISI 304 S.S. Stator jacket.
- Non-contaminating water filling.
- High efficiency electrical design, lower operating cost.
- Tropicalized design. (Lower winding temperature.)
- Pressure compensation diaphragm.
- Continuous duty.
Specifications :
- Degree of protection: IP 58.
- Insulation class : B.
- Ambient temp. : 45°C.
- Minimum Cooling flow along the motor :
30cm/sec. (15.0 KW - 37.0 KW).
45cm/sec. (45.0 KW - 93.0 KW).
- Water pH : 6.5 - 8.0.
- Maximum no. Starts per hour :
20 no. (15.0 KW - 37.0 KW).
15 no. (45.0 KW - 93.0 KW).
- Maximum submerged depth : 350 mts.
- Ratings : 15.0 KW - 93.0 KW .
- Voltages : Three phase 400V +10%, -15% - 50Hz.
- Thrust load : 32000 N (15.0 KW - 30.0 KW).
45000 N (37.0 KW - 93.0 KW).
- Standard motor cable : Suitable for operation in drinking water.
1 X 10.0 mm² X 3mts.(15.0 KW)
1 X 16.0 mm² X 3mts.(18.5 KW - 30.0 KW)
1 X 25.0 mm² X 3mts.(37.0 KW)
1 X 35.0 mm² X 3mts.(45.0 KW)
2 X 25.0 mm² X 5mts.(55.0 KW)
2 X 35.0 mm² X 5mts.(66.0 KW - 93.0 KW)
- Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.
On Request :
- AISI 304 / 316 Stainless Steel Construction.
- Mechanical seal.
- Built-in PT 100 temperature sensor.
- Special Voltages.
- Double cable for Star - Delta operation.
|
|
|
| Send Mail |
10" (250 mm) Mixed Flow
Submersible Motor & Pumps for Deep Wells 250 mm
Construction
|
|
|
| Send Mail |
10"(250mm) Submersible L8 Motor
Quality for your borewell :
L10 Motors are water filled motors which can be easy to rewind and repair. They are built to provide maintenance-free, long life submersible pump operation.
Product features :
- Easily rewindable (wet wound) induction motor with PVC / PE insulated windings.
- Water lubricated radial and axial thrust bearing.
- Corrosion resistant AISI 304 S.S. Stator jacket.
- on-contaminating water filling.
- High efficiency electrical design, lower operating cost.
- Tropicalized design. (Lower winding temperature.)
- Pressure compensation diaphragm.
- Continuous duty.
Specifications :
- Degree of protection: IP 58.
- Insulation class : B.
- Ambient temp. : 45°C.
- Minimum Cooling flow along the motor :
30cm/sec. (37.0 KW - 93.0 KW).
50cm/sec. (110.0 KW - 185.0 KW).
- Water pH : 6.5 - 8.0.
- Maximum no. starts per hour : 15.
- Maximum submerged depth : 350 mts.
- Ratings : 37.0 KW - 185.0 KW.
- Voltages : Three phase 400V +10%, - 15% - 50Hz.
- Thrust load : 45000 N (37.0 KW - 75.0 KW).
60000 N (93.0 KW - 185.0 KW).
- Standard motor cable : Suitable for operation in drinking water.
1 X 25.0 mm² X 3mts.(37.0 KW)
1 X 35.0 mm² X 3mts.(45.0 KW)
2 X 25.0 mm² X 3mts.(55.0 KW)
2 X 35.0 mm² X 3mts.(66.0 KW - 93.0 KW)
2 X 50.0 mm² X 3mts.(110.0 KW)
2 X 70.0 mm² X 3mts.(147.0 KW -165.0 KW)
V2 X 95.0 mm² X 3mts.(165.0 KW -185.0 KW)
- Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.
On Request :
- AISI 304 / 316 Stainless Steel Construction.
- Mechanical seal.
- Built-in PT 100 temperature sensor.
- Special Voltages.
- Double cable for Star - Delta operation.
|
|
|
| Send Mail |
Aquapack Hydro Pneumatic Pressure System
General
LUBI AQUAPACK pressure booster system provides excellent performance for pressure boosting in bungalow schemes apartment complexes, multi storey buildings, hotels, hospitals, industries, schools etc. LUBI AQUAPACK Hydro - pneumatic systems are economical to operate and are reliable & flexible, to guarantee comfort & performance.
Features & Benefits
Ideal for pressure boosting without overhead tanks.
Constant pressure at all taps.
Low energy consumption.
Wide range.
Simple installation.
Continuous water supply due to standby pumps.
Low noise, tuff & reliable.
Fully factory assembled & tested.
Also available VFD controls for power saving solution.
|
|
Brief Discription of Aquapack Components Pumps
The pumps that are used are of international quality & are being exported worldwide by LUBI. LUBI has one of the largest range of pumps. Based on the site condition, LUBI can provide the perfect pumps to satisfy the site requirement. The pump shall be of single or multistage with dynamically balanced impellers & fitted with mechanical seal. The pump shall be furnished in close coupled construction with high efficiency & reliability. |
|
Control Panel Standard Features
Attractive control box with a dust proof & water proof IP 58 protection & lockable key
Highly reliable magnetic motor starters
Single phase prevention & overload motor protection
Dry run protection and low pressure protection
Delay & minimum run timers to eliminate unnecessary pump cycle
Auto/manual operation
Pump on & pump fault indication
Automatic alternation of lead pump.This will ensure equal run time of all
pumps.
At the heart of the control panel is a PLC with (HMI) display to programme the AQUAPACK hydro-pneumatic system for the site requirement.
|
|
Baseplate, Piping & Accessories
The entire pressure boosting system including piping, valves & control panel are factory mounted on a single rigid baseplate. The suction & discharge manifold shall be provided of steel or galvanised pipes with flanges for easy dissambly & assembly. The system includes highly reliable isolation valves, check valves, pressure gauge & pressure switches. The entire system is factory tested for performance. Based on customer requirement the system is factory calibrated for pressure settings as per site requirement.
|
Hydro - Pneumatic Tank
Corrosion proof composite/steel construction Hydro - pneumatic tank of light weight is supplied with the system. These composite tanks are made of LLDE liner with fiber-glass wound & epoxy resin outer shell. The tank is totally rust free.
|
|
Customer Service
Each and every AQUAPACK system sold by LUBI has a very strong service back-up provided by LUBI or our authorised technician to ensure all systems are continuously running without any problem.
|
|
|
| Send Mail |
Centrifugal LBI Pumps
Application
- For clean liquids without abrasives, which are non - aggressive for the pump materials.
(Solids content up to 0.2 %)
- For water supply.
- For heating, cooling, air - conditioning and circulation plants.
- For civil and industrial applications.
- For Pressure boosting.
- For fire fighting applications.
- For Irrigation of Fields / farms.
Performance Range
- Head range up to 55 meters.
- Flow range up to 1500 l/min. (90 m³/h).
Motor
- 2 - pole submersible motor 50Hz (n = 2900 RPM)
- Single phase : 230V +5 - 15 %
- Three phase : 400V +5 -15 %
- Insulation Class F
- Protection IP 44
- Constructed in accordance with IEC 34.
Operating conditions
- Liquid temperature up to 90 °.
- Ambient temperature up to 50°.
- Total suction lift up to 8 meters.
- Continuous duty.
Special Features on Request
- Other voltages.
- Special mechanical seal.
- higher liquid or ambient temperatures.
- Available in 60Hz.
Material
COMPONENTS |
MATERIAL |
Pump Casing |
Grey Iron |
Bracket |
Grey Iron |
Impller |
Grey Iron / Bronze |
Stator Frame |
Grey Iron |
Shaft |
Carbon Steel |
Mechanical Seal |
Graphite vs Ceramic |
NOTE : For Bronze impeller please add a subscript “B” to model no.
For Ex. : LBI-101 for Grey Iron impeller, LBI-101B for Bronze impeller.
|
|
|
| Send Mail |
Centrifugal LBH Pumps
Application
- For clean liquids without abrasives, which are non - aggressive for the pump materials.
(Solids content up to 0.2 %)
- For water supply.
- For heating, cooling, air - conditioning and circulation plants.
- For civil and industrial applications.
- For fire fighting applications.
- For Irrigation of Fields / farms.
Performance Range
- Head range up to 84 meters.
- Flow range up to 2500 l/min. (150 m³/h).
Motor
- 2 - pole submersible motor 50Hz (n = 2900 RPM)
- Single phase : 230V +5 - 15 %
- Three phase : 400V +5 -15 %
- Insulation Class F
- Protection IP 44
- Constructed in accordance with IEC 34.
Operating conditions
- Liquid temperature up to 90 °.
- Ambient temperature up to 50°.
- Total suction lift up to 8 meters.
- Continuous duty.
Special Features on Request
- Other voltages.
- Available in mechanical seal.
- higher liquid or ambient temperatures.
- Available in 60Hz.
Material
COMPONENTS |
MATERIAL |
Pump Casing |
Grey Iron |
Bracket |
Grey Iron |
Impller |
Grey Iron / Bronze |
Stator Frame |
Grey Iron |
Shaft |
Carbon Steel |
NOTE : For Bronze impeller please add a subscript “B” to model no.
For Ex. : LBH-18 for Grey Iron impeller, LBH-18B for Bronze impeller.
|
|
|
| Send Mail |
Centrifugal LES Pumps
Application
|
|
|
| Send Mail |
Drainage Pumps LAP
Application
|
|
|
| Send Mail |
End Suction Pump |
| |
| |
|
LUBI Standardized Process pumps are constructed to conform with the world
wide accepted ISO 2858 (DIN 24256) / DIN 24255 standard, which sets out
an agreed hydraulic grid for pump performance and at the same time,
ensures this performance is achieved within a precise dimensional standard. |
| Advantages |
To the end user, the advantages to be gained by specifying pumps constructed to the ISO 2858 standard are considerable and include the following:
- Simplification of design and tender procedures.
- Savings in time and cost due to standardization of pipework layouts.
- Reduction in spares requirements due to interchangeable components.
- Replacement pumps are available from a wide variety of sources, ensuring the user the best possible afrter sales
service.
|
BACK-PULL-OUT PUMP WITH SPACER TYPE COUPLING FACILITATE MAINTENANCE WITHOUT DISTURBING THE SUCTION AND DISCHARGE PIPING |
| Application |
LUBI Standardized Process pumps series is suitable for handling majority of organic and inorganic liquids which can be chemically aggressive or neutral, for a wide range of temperature and pressure in the following industries :
- Refineries, Petrochemical and Fertilizer Plants.
- Processing Plants like Sugar, Food, Paper, Pulp and Sewage treatment.
- Municipal Water Supply, Irrigation Schemes and Desalination Plant.
- Thermal Power Plants.
- Heating and Airconditioning Plants |
| Main Features |
- Volute casing with end suction and top center line delivery branch with integerally cast feet offer a strong and rugged
constrution.
- Impellers have been developed with computer aided design techniaque for high efficiency and better suction lifts. They are double shrouded and hydraulically balanced with back balancing vanes on the smaller sizes, and back balancing replaceable wear rings on the larger sizes.
- Back pull out facility permits removal of driving head with impeller assembly without disturbance of suction and delivery pipework.Drive motor can also remain in place if spacer coupling is used.
- Shaft is supported in oil lubricated ball bearings. Sealed grease lubricated bearings are available on request.
- The standardization and rationalization of the design permits high interchangeability of components. All the 29 models are assembled using 4 bearing frames, shafts, ball bearings and shaft seals. This feature simplies spare parts stocking and servicing with reduced cost of operation and overhauling.
- Shaft sealing executions can be with gland packings or single/double mechanical seals to suit the liquid pumped.
- As pump dimensions are standardized, installation time and cost are minimum.
- To prolong the life of the pump replaceable wear rings are fitted to volute casings.
- For high temperature applications stuffing box cooling arrangement can be provided.
- Flanges can be provided to DIN / BS / ANSI /ISI standard as required by the user. |
| Operating Specifications |
- Nozzle Diameters : 32mm to 200mm
- Flow Range : upto 750 m qube / hr ( 12500 LPM or 3300 USGPM or 2750 IGPM )
- Head Range : upto 160 metres ( 525 feet )
- Operating Speed : 1450, 2900 & 960 RPM ( available for 60 Hz also)
- Operating Pressure : upto 16 bars.
- Operating Temperature : -30 to +300 degrees centigrade ( -22 to + 572 degrees farenheit ) |
|
| Send Mail |
Grinder Pumps LGP
Application
|
|
|
| Send Mail |
Horizontal Submersible LHL Pumps
Application
- For clean liquids without abrasives, which are non - aggressive for the pump materials.
(Solids content up to 0.2 %)
- Canals / River belt irrigation.
- For water supply.
- Fountains.
- For fire fighting applications.
- For civil and industrial applications.
- For heating, cooling, air - conditioning and circulation plants.
Performance Range
- Head range up to 42 meters.
- Flow range up to 950 l/min. (57 m³/h).
Motor
- 2 - pole submersible motor 50Hz (n = 2900 RPM)
- Single phase : 230V +5 - 15 %
- Three phase : 400V +5 -15 %
- Protection IP 68
Operating conditions
- Liquid temperature up to 35°.
- Ambient temperature up to 50°.
- Minimum submergence depth 0.5 meters.
- Continuous duty.
Special Features on Request
- Other voltages.
- Available in 60Hz.
Material
COMPONENTS |
MATERIAL |
Pump Casing |
Grey Iron |
Impller |
Grey Iron / Bronze |
Adaptor |
Grey Iron |
Lower Bearing Housing |
Grey Iron |
Stator Frame |
Stainless Steel |
Shaft |
Stainless Steel |
NOTE : For Bronze impeller please add a subscript “B” to model no.
For Ex. : LHL-150 for Grey Iron impeller, LHL-150B for Bronze impeller.
|
|
|
| Send Mail |
Horizontal Submersible LHL Pumps
Application
- For clean liquids without abrasives, which are non - aggressive for the pump materials.
(Solids content up to 0.2 %)
- Canals / River belt irrigation.
- For water supply.
- Fountains.
- For fire fighting applications.
- For civil and industrial applications.
- For heating, cooling, air - conditioning and circulation plants.
Performance Range
- Head range up to 55 meters.
- Flow range up to 1500 l/min. (90 m³/h).
Motor
- 2 - pole submersible motor 50Hz (n = 2900 RPM)
- Three phase : 400V +5 -15 %
- Protection IP 68
Operating conditions
- Liquid temperature up to 35°.
- Ambient temperature up to 50°.
- Minimum submergence depth 0.5 meters.
- Continuous duty.
Special Features on Request
- Other voltages.
- Available in 60Hz.
Material
COMPONENTS |
MATERIAL |
Pump Casing |
Grey Iron |
Impller |
Grey Iron / Bronze |
Adaptor |
Grey Iron |
Lower Bearing Housing |
Grey Iron |
Stator Frame |
Grey Iron |
Shaft |
Carbon Steel |
Thrust Bearing |
Fibre / Bronze |
NOTE : For Bronze impeller please add a subscript “B” to model no.
For Ex. : LHL-1 for Grey Iron impeller, LHL-1B for Bronze impeller.
|
|
|
| Send Mail |
Horizontal Submersible LHS Pumps
Application
- For clean liquids without abrasives, which are non - aggressive for the pump materials.
(Solids content up to 0.2 %)
- Canals / River belt irrigation.
- For water supply.
- Fountains.
- For fire fighting applications.
- For civil and industrial applications.
- For heating, cooling, air - conditioning and circulation plants.
Performance Range
- Head range up to 76 meters.
- Flow range up to 3200 l/min. (192 m³/h).
Motor
- 2 - pole submersible motor 50Hz (n = 2900 RPM)
- Three phase : 400V +5 -15 %
- Protection IP 68
Operating conditions
- Liquid temperature up to 35°.
- Ambient temperature up to 50°.
- Minimum submergence depth 0.5 meters.
- Continuous duty.
Special Features on Request
- Other voltages.
- Available in 60Hz.
Material
COMPONENTS |
MATERIAL |
Pump Casing |
Grey Iron |
Impller |
Grey Iron / Bronze |
Adaptor |
Grey Iron |
Lower Bearing Housing |
Grey Iron |
Stator Frame |
Grey Iron |
Shaft |
Carbon Steel |
Diaphragm |
Rubber |
NOTE : For Bronze impeller please add a subscript “B” to model no.
For Ex. : LHS-27 for Grey Iron impeller, LHS-27B for Bronze impeller.
|
|
|
| Send Mail |
Pressubre Booster Systems
Lubi Hydro Series Pumps can provide peak pressure
to every bathroom or water fixture in your home and
garden at the same time. Enjoy pressurized water at
each tap in your home regardless of its location in the house.
When you are in the shower you don’t like a dribble of water.
Lubi Hydro Series Pumps can provi- -de pressurized water in
each shower of the home. It will also not affect the pressure
if another shower, tap or washing machine is turned on.
Reliable, Long Lasting Lubi Hydro Series Pumps are built to
the highest engineering standards to work automatically under
the most demanding conditions. Hydro - pneumatic tank used in
the system have a two part polyurethene paint finish on the out
side and a polyurethene liner in the water chamber to provide
corrosion resistance. The diaphragm in the tank is made of a
high grade butyl rubber. The system connections are of
stainless steel.
A Lubi Hydro Series Pumps is easy to Install and Operate.
Just connect the suction to your home water tank and discharge
to the pipe going to the home water line. Give electrical conne
- -ction and switch on.
|
|
|
| Send Mail |
Centrifugal MCS Pumps
Application
|
|
|
| Send Mail |
Centrifugal Monoblock MDH Pumps
"LUBI" brand single phase Monoblock pumpsets are manufactured in reference to IS : 9079 and motoro with reference IS : 996 & IEC 34 - 1. Special care and quality conterol measures are adopted to give efficient and reliable operation for years. special features are outlined below.
Application
- Residential Bunglows.
- Community Water Supply.
- Construction Sites.
- Apartments.
- Samll Farms.
- Lawns & Gardens.
- Car Washing.
- Sprinklers
- Hotels & Hospitals
Salient Features
- The laminations are non - oriented silicon steel & confirms to IS - 648.
- Volute, Impeller, Adaptor, Stator body, Endshield is made of close grained cast iron of high tensile strength and has a very smooth surface finish resultig in low friction losses.
- Motor windings are vaccum imperegnated with synthetic vernish for better monisture resistance.
- Superior mechanical shaft seal for longer life and effective sealing against water leakage.
- The electric rotor is pressure die cast & uses electric wrade aluminium.
- Grease Labricated anti - friction ball bearings are fitted at both ends to withstand radial and axial loads.
- Better insulating materials are used so that pumpset can with stand high temperature rise.
- All components are manufactured from materials as per standard specifications.
- They are precisely machined on modern machins tools to give you years of reliable operation.
Standard Motor
- The motor is totally enclosed and fan cooled (TEFC).
- Motor with specification of IS : 996 & IEC : 34 - 1.
- Class 'B' insulation is used.
- The stainless steel shaft is ground finished.
- The motor are of the capacitor Start & Run (CS & R) desing giveing high starting torque.
- 2 - Pole induction motor.
- Input supply condition is single phase - 230V, Three Phase 415 (50Hz).
- Voltage Range 170V - 240V (Single Phase), 300V - 415V (Three Phase).
|
|
|
| Send Mail |
Self - Priming LBM Mud Pumps
Application
- Marine - Pumping water from docks, Ports, vessels.
- Industrial - Pumping petroleum products, Chemical effluents, Sewage, ash-water etc.
- Civil construction - Dewatering foundations, trenches and pits.
- Mobile Machinery - Cooling water for marine engines and shovels.
- Public utilities - Sewage pumping.
Performance Range
- Head range up to 25 meters.
- Flow range up to 900 l/min. (54 m³/h).
Motor
- 2 - pole submersible motor 50Hz (n = 2900 RPM)
- 4 - pole submersible motor 50Hz (n = 1440 RPM)
- Single phase : 230V +5 -15 % with thremal protection.
- Three phase : 400V +5 -15 % with thremal protection.
- Insulation class F
- Protection IP 44
- Constructed in accordance with IEC 34.
Operating conditions
- Liquid temperature up to 90°C.
- Ambient temperature up to 50°C.
- Maximum suction lift up to 8 m.
- Continuous duty.
Special Features on Request
- Other voltages.
- Higher liquid or ambient temperatures.
- Available in 60Hz.
NOTE : For Stainless Steel impeller please add a subscript “S” to model no.
For Ex. : LBM-310 for Grey Iron impeller, LBM-310S for Stainless Steel impeller.
Material
COMPONENTS |
MATERIAL |
Pump Casing |
Grey Iron |
Impller |
Grey Iron / Stainless Steel |
Adaptor |
Grey Iron |
Stator Frame |
Grey Iron |
Shaft |
Carbon Steel |
|
|
|
| Send Mail |
Multi - Stage Centrifugal MFHC Pumps
Application
|
|
|
| Send Mail |
Peripheral Non Self-Priming MI NSP Pumps
Application
|
|
|
| Send Mail |
Peripheral Self-Priming MI SP Pumps
Application
|
|
|
| Send Mail |
Pressure Booster MH Series Pumps
Lubi MH series, Non Self Priming, Multi Stage, Horizontal
Centrifugal Pumps is a compact Pumpset.
The pump has stylish but maintenance free features
like – power coated motor and pump casing for
anti-corrosion. All wet moving parts are made from
stainless steel for long life and better efficiency.
Strong mechanical seal for leak free operations.
Application
|
|
|
| Send Mail |
Self - Priming MCJ Jet Pumps
Application
|
|
|
| Send Mail |
Self - Priming Liquid Ring MPR Pumps
Application
|
|
|
| Send Mail |
Sewage Pumps LFP
Application
|
|
|
| Send Mail |
Heavy Duty Sewage Pumps LHP
Application
|
|
|
| Send Mail |
Self - Priming MCJ Jet Pumps
Application
|
|
|
| Send Mail |
Side Suction Peripheral MPS Pumps
Application
|
|
|
| Send Mail |
CSP Series Small Submersible Drainage Pumps / Sump Pumps
Features
Rugged cast iron pump housing, impeller, and motor casing with powder coating for corrosion and rust prevention.
230V thermally protected energy efficient motor.
Permanently lubricated motor ball bearings.
Extra long 15 Feet grounded power cord.
1-1/2” BSP Discharge pipe size.
Suitable for clear water only.
Motor Specifications
230V, 50Hz.
1Phase.
2850 RPM
Oil Filled : Thermally Protected 
Minimum sump pit diameter
 |
|
|
|
| Send Mail |
CSP Series Small Submersible Drainage Pumps / Sump Pumps
Features
|
|
|
| Send Mail |
MSP Series Small Submersible Drainage Pumps / Sump Pumps
Features
|
|
|
| Send Mail |
MSP Series Small Submersible Drainage Pumps / Sump Pumps
Features
|
|
|
| Send Mail |
Two - Stage Centrifugal MCT Pumps
Application
|
|
|
| Send Mail |
Vertical Submersible LVS Pumps
Application
- For clean liquids without abrasives, which are non - aggressive for the pump materials.
(Solids content up to 0.2 %)
- Canals / River belt irrigation.
- For water supply.
- Fountains.
- For fire fighting applications.
- For civil and industrial applications.
- For heating, cooling, air - conditioning and circulation plants.
Performance Range
- Head range up to 110 meters.
- Flow range up to 1000 l/min. (60 m³/h).
Motor
- 2 - pole submersible motor 50Hz (n = 2900 RPM)
- Three phase : 400V +5 -15 %
- Protection IP 68
Operating conditions
- Liquid temperature up to 35°.
- Ambient temperature up to 50°.
- Minimum submergence depth 0.5 meters.
- Continuous duty.
Special Features on Request
- Other voltages.
- Available in 60Hz.
Material
COMPONENTS |
MATERIAL |
Bowl |
Grey Iron |
Impller |
Grey Iron / Bronze |
Adaptor |
Grey Iron |
Lower Bearing Housing |
Grey Iron |
Motor Base |
Grey Iron |
Stator Frame |
Grey Iron |
Shaft |
Carbon Steel |
Thrust Bearing |
Carbon / S.S. |
Diaphragm |
Rubber |
NOTE : For Bronze impeller please add a subscript “B” to model no.
For Ex. : LVS-1 for Grey Iron impeller, LVS-1B for Bronze impeller.
|
|
|
| Send Mail |
|
